NordicTrack Gx 7.0 Pro Bike English Manual - Page 7
Avoid pinching, the wires, Tip: Avoid pinching the wires., start all the Screws, and then, tighten
 |
View all NordicTrack Gx 7.0 Pro Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Orient the Upright (2) as shown. Have a second person hold the Upright near the front of the Frame (1). Tie the lower end of the wire tie in the Upright (2) to the Main Wire (43), to the Frame Pulse Wire (42), and to the Extension Wire (86) in the Frame (1). Pull the upper end of the wire tie until the wires are routed through the Upright (2). 3 2 Wire Tie Wire Tie 43 86 42 1 4. Tip: Avoid pinching the wires. Slide the Upright (2) onto the Frame (1). Attach the Upright (2) with four M10 x 62mm Screws (70); start all the Screws, and then tighten them. 4 Avoid pinching the wires 2 70 1 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
7
3
4
2
86
42
43
70
2
1
Wire Tie
Avoid pinching
the wires
Wire Tie
3.
Orient the Upright (2) as shown. Have a second
person hold the Upright near the front of the
Frame (1).
Tie the lower end of the wire tie in the Upright
(2) to the Main Wire (43), to the Frame Pulse
Wire (42), and to the Extension Wire (86) in the
Frame (1).
Pull the upper end of the wire tie until the wires
are routed through the Upright (2).
4.
Tip: Avoid pinching the wires.
Slide the
Upright (2) onto the Frame (1).
Attach the Upright (2) with four M10 x 62mm
Screws (70);
start all the Screws, and then
tighten them.
1