NordicTrack Ntevel19016 Instruction Manual - Page 26

HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first unplug the power cord. Next, use a stan- dard screwdriver and pry the Outer Disc (20) off the Right Outer 23 Shield (23). 20 Locate the Reed Switch (56). Turn the Pulley (73) until a Magnet (137) is aligned with the Reed Switch. Next, remove the two M4 x 16mm Screws (98), and then remove the Reed Switch Bracket (54). Then, slightly loosen the two M4 x 10mm Clamp Screws (126). Then, reattach the Reed Switch Bracket (54) and slide the Reed Switch (56) slightly closer to or away from the Magnet (137). Plug in the power cord and rock the Pulley (73) forward and backward so that the Magnet passes the Reed Switch repeatedly. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, remove the Reed Switch Bracket (54), retighten the two M4 x 10mm Clamp Screws (126), and reattach the Reed Switch Bracket. Then, reattach the outer disc to the right outer shield and plug in the power cord. 98 56 54 137 126 73 26