NordicTrack Ntevel19016 Instruction Manual - Page 8

6. Identify the Left Pedal Arm (9). Using a plastic bag to keep your fingers clean, apply a generous amount of the included grease to the axle on the Left Pedal Arm. Then, insert the Left Pedal Arm (9) into the Left Leg (6). Attach the Left Pedal Arm (9) with an M8 x 14mm Shoulder Screw (112), an Outer Pedal Cover (133), and a Pedal Arm Washer (89). Attach the Right Pedal Arm (132) to the Right Leg (5) in the same way. 6 5 132 9 Grease 6 89 133 112 7. See the inset drawing. Loosen the indicated M8 x 45mm Bolt (124). 7 Next, rotate the Right Upper Body Arm (7) into the vertical position. Secure the Right Upper Body Arm (7) to the Right Leg (5) with an M8 x 45mm Bolt (124) and an M8 Locknut (123). IMPORTANT: See the inset drawing. Tighten the indicated M8 x 45mm Bolt (124). Tip: Avoid pinching the wires (not shown). Slide the Right Leg Cover B (36) downward and press it into place. Repeat this step on the other side of the elliptical. 124 123 5 Avoid pinching the wires 7 36 124 8