NordicTrack Ntevex18718 Instruction Manual - Page 31
with the Reed Switch 115. Slide the Reed Switch
View all NordicTrack Ntevex18718 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first unplug the power cord. Next, remove the three indicated M4 x 16mm Screws (83) from the Right and Left Shields (30, 32). 83 83 83 21 30 32 115 137 8833 Then, carefully pull the tops of the Right and Left Shields (30, 32) apart a few inches. See the inset drawing. Slightly loosen the two indicated M4 x 16mm Screws (83). Next, rotate the Left Crank Arm (21) until a Pulley Magnet (137) is aligned with the Reed Switch (115). Slide the Reed Switch slightly toward or away from the Pulley Magnet. Then, retighten the Screws. Plug in the power cord and rotate the Left Crank Arm (21) for a moment. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the Right and Left Shields (30, 32). 21 31