NordicTrack Ntevex76017 Instruction Manual - Page 17

HOW TO USE AN ONBOARD WORKOUT 1. Turn on the console. next segment, the resistance level and/or target speed will appear in the display to alert you. The resistance of the pedals will then change. Begin pedaling or press any button on the console to turn on the console. As you exercise, keep your pedaling speed near the target speed for the current segment. When you turn on the console, the displays will turn on, a tone will sound, and the console will be ready for use. 2. Select an onboard workout. IMPORTANT: The target speed is intended only to provide motivation. Your actual pedaling speed may be slower than the target speed. Make sure to pedal at a speed that is comfortable for you. To select an onboard workout, press the desired Workout Apps button repeatedly until the desired workout appears in the display. When you select an onboard workout, the display will show the name of the workout and the duration of the workout or the number of calories to be burned. If the resistance level for the current segment is too high or too low, you can manually override the setting by pressing the Quick Resistance buttons. IMPORTANT: When the current segment of the workout ends, the pedals will automatically adjust to the resistance level programmed for the next segment. The workout will continue in this way until the last segment ends. To pause the workout at any time, stop pedaling. The time will flash in the display. To resume the workout, simply resume pedaling. To end the workout, press the End/Summary button. A summary of the workout will appear in the displays for several seconds. 4. Follow your progress with the displays. See step 4 on page 15. The maximum speed and the maximum resistance level for the workout will also appear in the display. 3. Begin pedaling to start the workout. Each workout is divided into one-minute segments. One resistance level and one target speed is programmed for each segment. Note: The same resistance level and/or target speed may be programmed for consecutive segments. 5. Measure your heart rate if desired. See step 5 on page 16. 6. Turn on the fan if desired. See step 6 on page 16 7. When you are finished exercising, the console will turn off automatically. At the end of each segment of the workout, a series of tones will sound. If a different resistance level and/or target speed is programmed for the See step 7 on page 16. 17