NordicTrack V7 Uk Manual
NordicTrack V7 Manual
 |
View all NordicTrack V7 manuals
Add to My Manuals
Save this manual to your list of manuals |
NordicTrack V7 manual content summary:
- NordicTrack V7 | Uk Manual - Page 1
. c/o HI Group PLC Express Way Whitwood, West Yorkshire WF10 5QJ, UK AUSTRALIA Call: 1-800-237-173 E-mail: [email protected] CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference. USERʼS MANUAL www.iconeurope.com - NordicTrack V7 | Uk Manual - Page 2
CHART 6 ASSEMBLY 7 HOW TO USE THE VIBRATION PLATFORM 13 TROUBLESHOOTING 17 PART LIST 18 EXPLODED DRAWING 19 ORDERING cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. NordicTrack is a registered - NordicTrack V7 | Uk Manual - Page 3
precautions and instructions in this manual and all warnings on the vibration platform before using the vibration platform. ICON problems. 2. It is the responsibility of the owner to ensure that all users of the vibration platform are adequately informed of all precautions. 3. The vibration platform - NordicTrack V7 | Uk Manual - Page 4
in use. (See the drawing on page 5 for the location of the power switch.) DANGER: 22. Always unplug the power cord when the vibration platform is not in use and before cleaning the vibration plat- form. Servicing other than the procedures in this manual should be performed by an authorized - NordicTrack V7 | Uk Manual - Page 5
you for selecting the revolutionary NordicTrack® V7 vibration platform. The V7 vibration platform offers whole body vibration options designed to make your workouts effective and enjoyable. For your benefit, read this manual carefully before you use the vibration platform. If you have questions - NordicTrack V7 | Uk Manual - Page 6
in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached. M10 - NordicTrack V7 | Uk Manual - Page 7
Easier This manual is designed to ensure that the vibration platform can be assembled successfully by almost anyone. Most people find that if they set aside plenty of time, assembly goes smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly - NordicTrack V7 | Uk Manual - Page 8
Bolt (33) and an M10 Locknut (32). Do not overtighten the Locknut; the Wheel must rotate freely. Note: If the Wheel (30) rattles when the vibration platform is in use, tighten the M10 Locknut (32) until the rattling stops. 32 30 35 33 8 - NordicTrack V7 | Uk Manual - Page 9
yet. 42 6. Locate the wire tie inside the Upper Upright (36). Insert the wire tie through the hole in the Weight 6 Rest Frame (41). Next, attach the Upper Upright (36) to the Weight Rest Frame (41) with two M10 x 50mm Patch Screws (51) and two M10 Split Washers (38). 7. Have a second person - NordicTrack V7 | Uk Manual - Page 10
8. Tip: Be careful not to pinch the wires during 8 this step. Attach the Upper Upright (36) to the Lower Upright (1) with four M10 x 20mm Patch Screws (28) and four M10 Split Washers (38). See step 5. Tighten the eight M5 x 38mm Screws (40). 36 38 28 28 38 1 9. Tip: Orient the Handlebar (39) - NordicTrack V7 | Uk Manual - Page 11
11. Attach the back of the Console (3) to the Upper Upright (36) with two M4 x 16mm Round 11 Screws (26). Do not tighten the Round Screws yet. 36 3 26 12. While a second person holds the front of the Console (3) near the Upper Upright (36), con- 12 nect the console ground wire to the Ground - NordicTrack V7 | Uk Manual - Page 12
pins to the adjustment holes marked "1.1". Place the Dumbbell on the weight plates. Then, lift the two selector pins and slide them to the with the other Dumbbell (44). 44 42 Selector Pins 44 Weight Plates Slots 15. Plug the appropriate Power Cord (17, 60) into the Receptacle (18) located on - NordicTrack V7 | Uk Manual - Page 13
HOW TO USE THE VIBRATION PLATFORM HOW TO MOVE THE VIBRATION PLATFORM Before moving the vibration platform, unplug the power cord and remove the dumbbells from the weight rest. Hold the handlebar and place one foot against the wheel. Tilt the vibration platform until it rolls freely on the wheel. - NordicTrack V7 | Uk Manual - Page 14
cord is damaged, it must be replaced with a manufacturer-recommended power cord. 1. Plug the indicated end of the appropriate power cord into the socket on the vibration platform. 1 Socket on vibration platform 2. Plug the power cord into an appropriate outlet that is properly installed and - NordicTrack V7 | Uk Manual - Page 15
the time and frequency of the vibration platform while the voice of a personal trainer coaches you and motivates you through your workouts. IFit cards are available separately. To purchase iFit cards, go to www.iFit.com or see the front cover of this manual. iFit cards are also available at select - NordicTrack V7 | Uk Manual - Page 16
, the voice of a personal trainer will begin guiding you through your workout. 3. When you are finished exercising, remove the iFit card. Note: When the session ends, a tone will sound to alert you, and the vibration platform will automatically stop. Remove the iFit card when you are finished - NordicTrack V7 | Uk Manual - Page 17
not use solvents to clean the vibration platform. Most vibration platform problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on - NordicTrack V7 | Uk Manual - Page 18
3 1 Console 4 1 Platform Plate 5 1 Base 6 1 Vibration Platform 7 1 Stop Button 8 1 Start Button 9 2 Controller Box 10 1 Transformer 11 1 Controller 12 1 Motor 13 5 Foot 14 4 Shock Absorber Cover 15 4 Shock Absorber 16 4 Platform Cap 17 1 Power Cord 18 - NordicTrack V7 | Uk Manual - Page 19
EXPLODED DRAWING 24 48 7 24 8 48 22 24 48 2 Model No. NTEVVB14808.0 R1110A 39 37 38 37 3 38 27 27 45 26 52 53 36 24 42 48 21 44 23 4 59 57 54 11 40 40 59 38 51 38 41 40 40 28 49 12 46 47 25 50 25 46 47 25 54 25 6 17 60 14 31 28 9 31 31 15 1 53 32 18 19 55 38 38 32 - NordicTrack V7 | Uk Manual - Page 20
) • the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual) RECYCLING INFORMATION This electronic product must not be disposed of in municipal waste. To preserve the environment, this product must be recycled after its useful
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
USERʼS MANUAL
Model No. NTEVVB14808.0
Serial No.
Write the serial number in the
space above for reference.
Serial
Number
Decal
www.iconeurope.com
QUESTIONS?
If you have questions, or if there are
missing parts, please contact us:
UK
Call: 08457 089 009
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5QJ, UK
AUSTRALIA
Call: 1-800-237-173
E-mail: