NordicTrack V7 Uk Manual - Page 4

16. Always remove the dumbbells from the vibration platform before moving the vibration platform. 17. Use the vibration platform and the included dumbbells only as described in this manual. 18. When connecting the power cord (see page 14), plug the power cord into an earthed circuit. No other appliance should be on the same circuit. When replacing the fuse, an ASTA approved BS1362 type should be fitted to the fuse carrier. A 13 amp fuse should be used. 19. If an extension cord is needed, use only a 3conductor, 14-gauge (1 mm2) cord that is no longer than 5 ft. (1.5 m). 20. Keep the power cord away from heated surfaces. 21. Never leave the vibration platform unattended while it is running. Always unplug the power cord and press the power switch to the off position when the vibration platform is not in use. (See the drawing on page 5 for the location of the power switch.) DANGER: 22. Always unplug the power cord when the vibration platform is not in use and before cleaning the vibration plat- form. Servicing other than the procedures in this manual should be performed by an authorized service representative only. 4