NordicTrack V7 Uk Manual - Page 9
Attach the Weight Rest 42 to the Weight Rest
 |
View all NordicTrack V7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. Attach the Weight Rest (42) to the Weight Rest Frame (41) with eight M5 x 38mm Screws (40). 5 Do not tighten the Screws yet. 42 6. Locate the wire tie inside the Upper Upright (36). Insert the wire tie through the hole in the Weight 6 Rest Frame (41). Next, attach the Upper Upright (36) to the Weight Rest Frame (41) with two M10 x 50mm Patch Screws (51) and two M10 Split Washers (38). 7. Have a second person hold the Upper Upright (36) near the Lower Upright (1). 7 See the inset drawing. Tie the lower end of the wire tie to the Wire Harness (43) as shown. Then, pull the upper end of the wire tie until the Wire Harness is routed through the Upper Upright (36). 40 40 41 40 40 Wire Tie 36 Hole 41 38 51 43 36 Wire Tie 43 1 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
-
20
 |
 |
5.
Attach the Weight Rest (42) to the Weight Rest
Frame (41) with eight M5 x 38mm Screws (40).
Do not tighten the Screws yet.
5
40
40
40
40
41
42
6.
Locate the wire tie inside the Upper Upright (36).
Insert the wire tie through the hole in the Weight
Rest Frame (41).
Next, attach the Upper Upright (36) to the
Weight Rest Frame (41) with two M10 x 50mm
Patch Screws (51) and two M10 Split Washers
(38).
6
36
38
51
41
9
7
43
Wire Tie
36
1
43
7.
Have a second person hold the Upper Upright
(36) near the Lower Upright (1).
See the inset drawing.
Tie the lower end of the
wire tie to the Wire Harness (43) as shown.
Then, pull the upper end of the wire tie until the
Wire Harness is routed through the Upper
Upright (36).
Hole
Wire Tie