Oki B4300 OkiLAN 8100 SoftNIC User's Guide

Oki B4300 Manual

Get Oki B4300 PDF manuals and user guides View all Oki B4300 manuals
Add to My Manuals
Save this manual to your list of manuals

Oki B4300 manual content summary:

  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 1
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 2
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 3
    errors beyond its control. Oki also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will 2002 by Oki. All rights reserved. Oki is a registered trademark of Oki Electric Industry Company Ltd. Microsoft, MS-DOS and Windows are
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 4
    Installation 19 Interface 22 File menu 22 Status Menu 22 Setup Menu 23 Oki Device Setup 24 General Tab 24 TCP/IP Tab 25 Netware Tab 26 Default Values 46 Management utility 61 PrintSuperVision 61 System requirement 62 Windows 62 Supported Browsers 63 Supported Printers 63 Supported
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 5
    78 IPP 79 Windows XP 80 OKILPR 80 Port 9100 81 IPP 82 Novell Netware IPX 82 NetBEUI Protocol 83 Network Printer Settings 83 Windows 95/98/Me 83 Windows NT 4.0 84 Windows 2000 85 Windows XP 85 Printer driver configuration 86 Novell NetWare 88 Overview 88 Supported Versions and Modes
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 6
    configuration 102 LPD Printing 103 Logical printers 104 BSD-based UNIX 104 System V-based UNIX 104 FTP printing 105 Logical directories 105 Apple Macintosh 109 Overview 109 Supported Versions 109 Installation 109 OS 8.6 to 9.1 109 OS X 110 Troubleshooting 112 Self-diagnostic test 112
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 7
    those frame types automatically. Also, it supports major protocols such as TCP/IP, IPX/SPX (NetWare), EtherTalk and NetBEUI. This section details the specification and several software utilities. For multiple emulation printers, change the emulation in the Printer Menu settings to Auto or PS before
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 8
    , FTP, TELNET, HTTP, IPP, BOOTP, DHCP, SNMP, DNS, SMTP, POP3 IPX/SPX (NetWare) Remote printer mode (up to eight file servers and 32 queues) Print server mode (up to eight print servers) Encrypted password supported in print server mode SNMP EtherTalk ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 9
    With the printer power switched on, press the print server test button for more than three seconds and release. The self-diagnostic test results and configuration settings are printed. Printed self-diagnostic test sample If "NG" is displayed instead of "OK" see the "Troubleshooting" chapter. Printed
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 10
    Configuration 8
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 11
    Configuration 9
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 12
    Configuration 10
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 13
    Assistant Configure multiple printers into groups. Filter out printers. Search and manage IP addresses. Includes firmware upgrade tool. Create MIB template. Windows 95 (OSR2 and above), Windows 98, Me. Windows NT4.0, 2k and XP can be used only with Administrator authority login; Internet Explorer
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 14
    TCP/IP manually or by using DHCP. > Set NetWare mode and create Queue/Print Server/Printer objects. > Zone name and Port name for EtherTalk. Configuration requires a PC with Windows 95/98/Me, Windows 2000 Advanced Server/Professional or Windows NT Server 4.0/Work-station 4.0, Windows XP running TCP
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 15
    The following explanation uses Windows 98 as an example. 1. Insert the CD-ROM provided with your printer into the CD-ROM drive. If the Menu Installer does not start automatically, click Start→Run→Browse. Browse to your CD-ROM and click Install→Ο
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 16
    4. Select the [Admin Mgr/Quick Setup]. 5. Select the language.. 6. Select Quick Setup. Configuration 14
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 17
    instructions on the model, the printer may have to be manuals for details of how to launch and use the browser. The network addresses used in this manual password.The username is [root] and the default password is the last six digits of the Ethernet address. The following explanation uses Windows
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 18
    interface card in [Address (Location/Position)] and press the [Enter] key. The Printer Status screen is displayed. 2. Click on a tab to see a particular Category, TELNET equivalents, see the description in the Configurable Items and Default Values table starting on page 46. 3. To ensure correct
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 19
    00:80:92:01:00:D2, a default password is [0100D2]. The Ethernet address (MAC address) is displayed during the self-diagnostic test. The root password can be changed to allow you to configure the print server and printer by using a Web browser. The default password is the last six digits of the
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 20
    Server 4.0/Work-station 4.0, Windows XP running TCP/IP or IPX/SPX (NetWare). This utility can only be used on a PC that can be connected to the network with TCP/IP or IPX/ SPX and must be used on a PC that is located in the same segment as the printer. To create a NetWare queue
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 21
    Installation The following explanation uses Windows 98 as an example. 1. Insert the CD-ROM provided with your printer into the CD-ROM drive. If the Menu Installer does not start automatically, click Start→Run→Browse. Browse to your CD-ROM and click Install→Ο
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 22
    4. Select the [Admin Mgr/Quick Setup]. 5. Select the language.. 6. Select OKI Device Standard Setup. Configuration 20
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 23
    7. Follow the on-screen instructions. If you want to install AdminManager on your local drive, select [Install and Execute]. Otherwise, select [Execute from CD-ROM].]. Configuration 21
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 24
    . Status Menu In the [Status] menu, the following items can be selected: Item Printer Status Function Current printer status is displayed: System Status Displays current OkiLAN configuration. Configuration data can be saved as log file. NetMeter Display current network status. For further
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 25
    printer's TELNET port. Note: The TELNET application is not included as part of the OkiLAN package. Install the TELNET package on to your system. For further information, see your Windows manual. Create NetWare Queue Create a NetWare queue. Delete NetWare Object Delete NetWare object. Reset
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 26
    tabs: > General > TCP/IP > NetWare > EtherTalk > NetBEUI > SNMP > POP (if your printer supports E-Mail reception) > SMTP The following section explains each tab's functionality. General Tab This allows you to set or change the root password used for Admin Manager, TELNET and FTP. Configuration 24
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 27
    Location Comments Change root password You can set/change the root password for AdminManager, TELNET and FTP. TCP/IP Tab This allows you to configure TCP/IP related items. Location Use TCP/IP Protocol Use DHCP/BOOTP Use RARP IP Address Subnet Mask Default Gateway Use FTP/LPD Banner DNS Server .
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 28
    WEB and TELNET, see the equivalent in the Configurable Items and Default Values table that starts on page 46. Netware Tab This is >>. The server is copied to Selected file server box. Password. Set password for Print Server. Job Polling Time. Set print job polling interval in seconds. Configuration
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 29
    in Operation Mode. By selecting the [RPRINTER] button, this is displayed: Printer Name NDS or Bindery Show the Available print server tree in NDS mode or Time Out Set duration from the last data's arrival to freeing of the port in seconds. Set the NetWare printer object name. Configuration 27
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 30
    Tab This allows you to configure EtherTalk related items. Location Comments Use EtherTalk Protocol Set EtherTalk protocol to enabled/disabled. Printer Name Set EtherTalk Printer object name. Zone Name Set the zone name to which the OkiLAN belongs. NetBEUI Tab This allows you to configure
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 31
    the correct community name or not. The community name is displayed as ****** for security reasons. TRAP Community This community name is (printer manager) name. SysName Set SysName (printer model name). SysLocation Set SysLocation (the location where the printer is installed). Default TTL
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 32
    the button, the following dialogue box is displayed: . . . In the dialogue box, the following items can be configured: Printer Trap Community Name This community name is assigned to outgoing printer status traps such as off-line, paper out, etc. TCP#1-5 Set the IP address to which a Trap packet
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 33
    Trap Setup Detail . . . . . . IPX Detail . . . Cover Open Set sending a Trap, enabled or disabled, when the printer cover opens. Printer Error Set sending a Trap, enabled or disabled, when any errors occur. Set node address and network address to which a Trap packet will be sent. By selecting
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 34
    Set password for POP3 server. Use APOP Check if you want to use APOP. POP3 Interval Set interval to retrieve E-Mail(s) from POP3 server. Set to OFF if you do not want to use POP3 function. The OkiLAN supports an e-mail reception function (SMTP/POP3) allowing the printer to print PDF and
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 35
    SMTP Tab In SNMP Tab, you can configure SNMP related items. Location Use SMTP Transmit Protocol Use SMTP Receive Protocol SMTP Server Address/Name Reply-To Address E-Mail Address Comments Set sending E-mail via SMTP, enabled or disabled. Set receiving E-mail via SMTP, enabled or disabled. Set IP
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 36
    to Selected condition list. Available conditions are: Off line, Consumable Message, Toner Low/ Out, Paper Low/Out, Paper Jam, Cover Open, Stacker Error, Mass Storage Error, Recoverable Error, Service Call Request and Finisher Error. To Address 1-5 Set E-mail addresses to that E-mail should be
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 37
    You should login to NetWare servers as a user who can create objects on the servers. If you want to create a queue with the remote printer mode on NetWare . 4. Follow the on-screen instructions. Mode Location PSERVER/ Print Server Queue RPRINTER Printer NDS Context should PSERVER be specified
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 38
    NetWare NDS network or bindery network. You should login to NetWare servers as a user who can delete and select [OK]. > The Ethernet Address (MAC address) is displayed during the selfdiagnostic test. printer OFF and ON. The requirement to turn your printer OFF and ON is dependent
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 39
    , AdminManager uses IPX/SPX protocol to search/configure network interface cards. Environment Setup TCP/IP Tab Set broadcast addresses that are used to search OKI network interface cards using the TCP/IP protocol. If [Use TCP/IP protocol] is unchecked, the search will not be carried out using TCP
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 40
    configuring commands may differ between workstations. Refer to the workstation's manual. 1. Login as [root]. If you do not have Superuser rights, 192.168.20.127 00:80:92:01:00:D2 temp The Ethernet address (MAC address) is displayed during the selfdiagnostic test. A temporary address does not need to
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 41
    manually or DHCP/RARP server may run), or with the network. Reset the network interface card settings to default and try to set temporary IP address. If you still have the problem after resetting EthernetBoard OkiLAN PRINTER". login: root 'root' user needs password to login. password: User 'root
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 42
    99:Exit setup Please select (1-99)? 5. Enter the number of the items to be changed and the details screen for that item is displayed. The menu has the following hierarchical structure so for more details see the description in the appropriate numbers Configuration 40
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 43
    4: Gateway 5: RARP protocol 6: DHCP/BOOTP protocol 7: DNS server(Pri.) 8: DNS server(Sec.) 9: Root password 99: Back to prior menu 1: Authentic community 2: Trap community 3: Trap address 4: SysContact 5: SysName 6: SysLocation 7: DefaultTTL 8: EnableAuthenTrap 99: Back to prior menu 1: NetWare
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 44
    name 4: Comment 99: Back to prior menu 1: NetWare port name 2: EtherTalk port name 3: BOJ string 4: EOJ string 5: BOJ string(KANJI) 6: EOJ string(KANJI) 7: Printer type 8: TAB size (char.) 9: Page width (char.) 10: Page length(line) 11: lpr/ftp banner 99: Back to prior menu 1: prn1 2: system Level3
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 45
    trap 7: Printer Error trap 8: IPX Trap address 9: IPX Trap net 99: Back to prior menu 1: To Address 1-5 2: Re-send Interval 3: Off-Line 4: Consumable Message 5: Toner Low/Out 6: Paper Low/Out 7: Paper Jam 8: Cover Open 9: Stacker Error 10: Mass Storage Error 11: Recoverable Error 12: Service Call
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 46
    POP (E-Mail) 97: Reset to factory set 98: Quit setup 99: Exit setup 12: Signature line 1 13: Signature line 2 14: Signature line 3 15: Signature line 4 99: Back to prior menu 1: POP3 protocol 2: POP3 server 3: POP port number 4: POP3 server UserID 5: POP3 server Password 6: Use APOP 7: Retrieve
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 47
    Using SNMP The printer and network card can be managed via a standard SNMP management station. The network card supports SNMPv1, MIB-II and OKI Data Private MIB. In order for the OkiLAN to be managed correctly from an SNMP management station, the OKI Data Private MIB needs to be added to that
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 48
    ] [Network [Setup TCP/IP]- 0.0.0.0- Set gateway Configuration]-[TCP/ [Gateway address] 255.255.255.255 (default route). IP]-[Fixed IP (0.0.0.0) Address Settings]- [Default Gateway] [OKI Device Setup][TCP/IP][Use RARP] [Network [Setup TCP/IP]- Configuration]-[TCP/ [RARP protocol] IP
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 49
    ][SNMP][TRAP Community] [OKI Device Setup][SNMP][TRAP Address] [OKI Device Setup][SNMP][SysContact] [OKI Device Setup][SNMP][SysName] Web browser TELNET/ Diagnostic test print Available options Notes [Setup TCP/IP][root password] Any alphanumeric characters up to seven characters. (Default is
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 50
    up to 255 characters. (Default is null) Set SysLocation (the location where the printer is installed) [OKI Device Setup][SNMP][Default TTL] [Setup SNMP]- 0- Any alphanumeric characters up to 31 characters. (Default is [OL] + last six digits of MAC address) Set Print Server name Configuration 48
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 51
    Configuration][NetWare]-[Remote Printer Mode]- [Job Timeout] EtherTalk-1 [OKI Device [Network mode]- [Password] Any alphanumeric characters up to 31 characters. (Default is null) Set password for Print ] 4-255 (10) Set duration from the last data's arrival to freeing the port in seconds [Setup
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 52
    object characters up to name 31 characters. (Default is [OL] + last six digits of MAC address + - prn1]) Port-2 [OKI Device [Network Setup]- Configuration]- [EtherTalk]- [EtherTalk]- [Printer Name] [EtherTalk Printer Name] [Setup printer port]-[EtherTalk port name] Any Set EtherTalk
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 53
    \f Page feed (0x0c) \r Carriage return (0x0d) \xnn Hex code [nn] (0xnn) \] Double quote (0x22) \\ Backslash (0x5c) [Setup printer port]-[EOJ string] Any alphanumeric and following control characters up to 31 characters. (Default is null) \b Backspace (0x08) \t Tab (0x09) \n Linefeed (0x0a
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 54
    (Default is null) printer after \b Backspace (0x08) \t Tab (0x09) \n Linefeed (0x0a) printing job when data is sent to sjis/euc logical printer/ directory \v Vertical tab (0x0b) \f Page feed (0x0c) \r Carriage return (0x0d) \xnn Hex code [nn
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 55
    OKI Device Setup]-[TCP/ IP]-[Use FTP/ LPD Banner] STATUS-1 [Status]- [Printer Status] [Printer Status] TELNET/ Diagnostic test print [Setup printer port]-[Printer type] Available options PS [Setup printer width Set page length when data is sent to sjis/euc logical printer/ directory. If the
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 56
    ][Paper Out] TELNET/ Diagnostic test print [Display status][system] Available options [Setup printer trap]-[Prn-Trap community] Any alphanumeric characters up to 77 characters. (Default is [public]) [Setup printer ENABLE/ trap]- DISABLE [Setup TCP#1-5 trap] - [TCP#1-5 Trap enable] [Setup
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 57
    Paper Jam] [OKI Device Setup][SNMP][Printer Trap Setup . . .][TCP#1-5][Detail . . .][Cover Open] [OKI Device Setup][SNMP][Printer Trap Setup . . .][TCP#1-5][Detail . . .][Printer Error] [OKI Device Setup][SNMP][Printer Trap Setup . . .][TCP#1-5] [OKI Device Setup][SNMP][Printer Trap Setup . . .][IPX
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 58
    . . .][Paper Jam] [OKI Device Setup][SNMP][Printer Trap Setup . . .][IPX][Detail . . .][Cover Open] [OKI Device Setup][SNMP][Printer Trap Setup . . .][IPX][Detail . . .][Printer Error] [OKI Device Setup][SNMP][Printer Trap Setup . . .][IPX] [OKI Device Setup][SNMP][Printer Trap Setup . . .][IPX
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 59
    (25) Set port number of SMTP [OKI Device Setup][SMTP]-[EMail Address] [Network Configuration][Email Settings][Email Transmit Settings][Printer Email Address] [Setup SMTP (E-Mail)][E-Mail address] Any alphanumeric characters up to 78 characters. (Default is null) Set the E-mail address that
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 60
    OKI Device Setup][SMTP]-[1- 5]-[Selected condition] [OKI Device Setup][SMTP]-[1- 5]- [Selected condition] [OKI Device Setup][SMTP]-[1- 5]- [Selected condition] [OKI Device Setup][SMTP]-[1- 5]- [Selected condition] [OKI when the printer is Offline if this is is sent when toner(s) low/ out occurs
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 61
    service call request occurs if this is enabled [OKI Device Setup][SMTP]-[1- 5]- [Selected condition] [Network Configuration][Email Settings][Email Alert Assignments][Finisher Error . (Default is null) Set up to four signature lines. Signature is added to the bottom of an E-mail [OKI Device
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 62
    Mail)]-[POP3 server Password] [Setup POP (E-Mail)][User APOP] [Setup POP (E-Mail)][Retrieve every(min.)] [Setup]-[Reset] [Network Configuration][General Settings][Restore Factory Defaults] Reset to factory set [Network Configuration][General Settings][System Information]- [Printer Serial Number
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 63
    and saving data for statistical reports. > Sending email alerts when events occur that affect the functionality of printers. > Creating statistical reports about usage of printers. > Tracking maintenance data related to printers. > Integrating with Oki Data's on-line web support. Configuration 61
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 64
    IIS (Internet Information Server) 1.0 IIS installed as an option. Available in the Windows XP CD Internet Service Manager included in the OS Internet Service Manager included in the OS PWD (Included in Windows 98 by default) PWS available in NT 4.0 Option Pack in Microsoft Web site PWD (Included in
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 65
    the option [Images off]. The hyperlinks may not work properly. Some versions of Netscape browser do not display the frames properly, and the [Back] button may not work correctly. Supported Printers PrintSuperVision provides general management information for OKI and non-OKI printers connected to
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 66
    be set. For setting any other printer settings, a hyperlink to the printer's web page is provided in PrintSuperVision. Supported network interface cards The list of network interface cards supported is listed below: Network Interface Cards Supported printer OkiLAN 6200e Plus OkiLAN 6200e OkiLAN
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 67
    [Network Software]. 3. Select [Administration Tools 4. Select [PrintSuperVision]. 5. Follow the on-screen instructions. In the [Edit Data] screen, you can specify a port number for PrintSuperVision (default 80). 6. When installation ends, the [Setup complete] screen is displayed. Click [Finish
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 68
    connected to the network via TCP/IP. This utility is for use with Windows XP, Windows 2000, Windows Me, Windows 98, Windows 95 and Window NT4.0. The utility is for those OKI printers which support TCP/IP; it redirects printing data to the lpr port of the specified IP address. System Requirement
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 69
    LPR utility The OKI LPR utility requires that the TCP/IP protocol should be installed in your Windows system. To install the TCP/IP protocol into your Windows system consult your Windows manual. Windows XP/2000/NT4.0 requires administrator privileges. 1. Set up the printer driver by designating the
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 70
    [OK]. A printer is added to the main window. Refer to the On-line Help for information on how to use the utility. Uninstallation 1. Stop the OKI LPR Utility. 2. Select [Start]→[Program]→[Okidata]→[OKI LPR Utility]→[Uninstall OKI LPR Utility] ([Start]→[All Programs]→[Okidata]→[OKI LPR Utility
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 71
    of their operating systems and this is a good reference point for the exact details of each configuration option within Windows. The network printer supports the following protocols that can be used in conjunction with the Windows operating system: > TCP/IP > IPX (Novell NetWare) > NetBEUI Microsoft
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 72
    Windows 2000/ Windows XP Method OKI LPR Utility OKI LPR Utility Microsoft LPR1 OKI LPR Utility Microsoft LPR1 Port 91001 IPP1 1These functions are built into Windows and are displayed as options when using the Add Printer IP address may cause severe network problems. Please check the address with
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 73
    of manufacturers, then select [TCP/IP] from the list of network protocols, then click [OK]. 7. The Windows installation CD-ROM may be required. Follow the remaining dialogue box prompts. Windows NT 4.0 1. Click [Start], select [Settings] and then click [Control Panel]. 2. Double-click the [Network
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 74
    [Close] button in the [Local Area Connection Properties] dialogue box. 7. Click [Close] in the [Local Area Connection Status] dialogue box. Windows XP 1. Click the [Start] button and select [Control Panel]. 2. Select [Network and Internet Connection] and [Network Connection]. 3. Double-click [Local
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 75
    Windows XP installation CD-ROM may be required. Follow the remaining dialogue box prompts. Once the protocol has been installed and configured in Windows, the next step is to configure the TCP/IP parameters in the network printer. Network printer Ethernet address (MAC Address) of the printer can be
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 76
    by the DHCP server. In an environment without a DHCP server, please assign the IP address manually. If you are assigning an IP address, you need to enter: >An IP address is the required protocol for printing data from the Macintosh environment. Do you use the NetBEUI protocol? Using NetBEUI makes it
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 77
    should be used. When installing the driver, ensure it is installed as a local printer and not a network printer. Ensure the appropriate printer driver has been installed in Windows. Install the Oki LPR utility as described on page 67 of this manual and add the printer installed earlier. Microsoft
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 78
    privileges. Oki LPR Please follow the procedure described in the Windows 95/98 /Me section on page 75. Microsoft LPR To install this port, the following needs to be carried out. 1. Select [Start], [Settings], [Control Panel] and then select [Printers]. 2. Select [Add Printer
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 79
    8. Follow the instructions on the screen to finish installing the LPRcompatible printer. If the LPR port is not available, install the Microsoft TCP/IP Printing Service. Insert the printer driver for Windows NT4.0. 1. Select [Start]→[Settings]→[Control Panel] and then double-click the [[Network]
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 80
    the host name or Internet Protocol (IP) address of the host for the printer you are adding. In [Name of printer or print queue on that server] type lp. Follow the instructions on the screen to finish installing the TCP/IP printer. Port 9100 1. Select [Start]→[Settings]→[Control Panel]. 2. Open the
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 81
    [Follow the instructions on the screen to finish installing the printer.] IPP 1. Select [Start]→[Settings]→[Control Panel and Printers]. 2. Open the [Printers Folder]. 3. Double-click [Add Printer] and then select [Next]. 4. Select [Network Printer]. 5. Select [Next]. 6. Type printer URL in text
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 82
    8. Install printer driver. Windows XP Windows XP requires administrator privileges. With Windows XP, there are four options for printing using TCP/IP. > Oki LPR > Microsoft LPR > Port 9100 > IPP In order to use Microsoft LPR, it must first be installed on your system. OKI LPR Please follow the
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 83
    [OK]. 14. Follow on screen instructions to finish installing the printer. Port 9100 1. Select [Start]→[Settings]→[Control Panel]→[Printers and Other Hardware]. 2. Select [Printers and Faxes]. 3. Click [Add Printer] and then click [Next]. 4. Select [Local printer attached to this computer], clear the
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 84
    ]. 8. Install printer driver Novell Netware IPX IPX is used with Novell NetWare. The OkiLAN supports Novell 3, 4, 5 and 6, and allows print jobs to be directed to the appropriate Novell print queue. Please refer to the relevant section of this manual for additional information. Microsoft Windows 82
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 85
    designed for use on small workgroups or LANs. Within Windows, NetBEUI is used for file and printer sharing between computers. It provides a simple method of Computer Name: Workgroup: Comment: Name assigned to the printer PrintServer1 User definable description 1Although the workgroup name can be
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 86
    of manufacturers, then select [NetBEUI] from the list of [Network Protocols] and then click [OK]. 7. The Windows installation CD-ROM may be required. Follow the remaining dialogue box prompts. Windows NT 4.0 1. Click the [Start] button, select [Settings] and then [Control Panel]. 2. Double-click the
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 87
    you can install the NetBEUI protocol into Windows XP, it is not supported. You should be able to use NetBEUI on LAN connections although you will not be able to use this on Remote Access Service Connections. 1. In the [Start] menu, select [Settings] then [Control Panel]. 2. Double-click [Network
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 88
    can configure Windows to print over the network. Printer driver configuration In the following example, the printer has been configured as follows: Computer Name: Workgroup: Comment: OL07DB85 PrintServer EthernetBoard OKILAN 1. Set up the printer driver as the default local printer. 2. In the
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 89
    to find it on the network. > A maximum of eight Ethernets can be managed by the Master Browser function. > Printing cannot be carried out and an error message appears when jobs from other users (including other protocols) are being printed. Microsoft
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 90
    guide is for NetWare administrators. It should be read in conjunction with the relevant Novell NetWare manual. The latest Novell service packs and Novell client versions should be installed. Supported on which the NetWare Rprinter operates. Remote Printer Mode adds additional traffic to the network
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 91
    three seconds and then release. The Ethernet address (MAC Address) of the printer can be found on the self-diagnostic printout, which printer objects. Please refer to Novell documentation for instructions on how to achieve this. Use the OKI Network Card Setup Utility (Quick Setup) or other printer
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 92
    Utility section and online help. Below is the NetWare configuration page from AdminManager. Novell NetWare 90
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 93
    up from a UNIX workstation. > The network addresses used in this manual are shown as examples only. Network addresses used in your installation must be [root] to change the configuration of the Print Server. By default, there is no root password. > If an incorrect IP address, Subnet Mask or Gateway
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 94
    (MAC manually or DHCP/RARP server may run), or with the network. Reset the network interface card settings to default and try to set temporary IP address. If you still have the problem after resetting login: root 'root' user needs password to login. password: User 'root' logged in. UNIX 92
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 95
    No. Message Value (level .1) 1 : Setup TCP/ IP 2 : Setup SNMP 3 : Setup NetWare 4 : Setup EtherTalk 5 : Setup NetBEUI 6 : Setup printer port 7 : Display Status 8 : Setup printer trap 9 : Setup SMTP Email 97 : Reset to factory set 98 : Quit setup 99 : Exit setup Please select (1- 99)? UNIX 93
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 96
    .255.255.0 4 : Gateway address : 192.168.20.1 5 : RARP protocol : DISABLE 6 : DHCP/ BOOTP protocol: DISABLE 7 : root password : " " 99 : Back to prior menu Please select (1- 99)? 6. Log out from the network interface card. Turn the printer off and on again to validate the following settings. UNIX 94
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 97
    : for host name PRINTER # ping PRINTER If there is no reply, then there is a problem with the configuration of the IP address (the IP address has been already set manually or DHCP/RARP server may run) or with the network. Reset the network interface card settings to their defaults and then try to
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 98
    the same as the name added to the /etc/hosts file. The name of the printer on the remote printer. It should be lp. The spool directory. Give the absolute path. The error log file. Give the absolute path. 5. Create the spool directory and error log file. Example: for spool Directory PRINTER_lp and
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 99
    on Open Windows. However, it cannot be used here, as the data recipient and queue have the same name. The procedure below must be used for registering a remote printer. If Solaris 2.x is connected to the remote printer for a long period according to the system specifications, errors and forced
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 100
    network interface card settings to default and try to set temporary IP address. If you still have the problem after resetting the network interface card, consult the network manager. 5. Register the network card as a remote printer server. Example: for host name PRINTER a. Stop the print scheduler
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 101
    # /usr/sbin/lpadmin -p PRINTER_lp -m PRINTER_model # /usr/sbin/lpsched UNIX 99
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 102
    an OKI printer as examples. The absolute PRINTER # ping PRINTER If there is no reply, there is a problem with the configuration of the IP address (the IP address has already been set manually or DHCP/RARP server may run), or with the network. Reset the network interface card settings to default
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 103
    -orplp -ocmrcmodel -osmrsmodel -ob3 e. Activate the print queue. # /usr/sbin/accept PRINTER_lp f. Enable the print queue. # /bin/enable PRINTER_lp g. Enable the printer spooler. # /usr/sbin/lpsched To customise output, for example, to add additional commands at the start of each print job, you can
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 104
    : for host name okiprinter # ping PRINTER If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or DHCP/RARP server may run), or with the network. Reset the network interface card settings to default and try to set a temporary
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 105
    spooler of the remote server "BSD" Description of printer name of the remote server "Optional comment" LPD Printing Line Printer Daemon (LPD) is the most common protocol for printing with TCP/IP to a network printer. Refer to the workstation's manual for details of lpr and lp commands. The
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 106
    printer driver. > sjis must be used for printing a text file of Shift JIS Kanji code. > euc must be used for the printing a text file of the EUC Kanji code. Logical printer lp sjis euc Printer > While the short format of lpq is a UNIX compatible format, the long format is unique to the OkiLAN print
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 107
    Transfer Protocol) is used for transferring a file with TCP/IP. If the print data is sent to a logical printer via FTP, it is printed. Refer to the workstation's manual a file created using the printer driver. sjis must be used for printing a text file of Shift JIS Kanji code. euc must be used for
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 108
    contents are output as it is and ASCII mode, which converts the LF code to the CR+LF code. If a binary file converted by the printer driver is transferred, the transfer mode has to be BINARY mode. Example: changing transfer mode to binary mode and verifying the current mode ftp> type binary UNIX
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 109
    login user name and transfer mode. In addition, printer status can be verified by specifying the directory after the stat (lp, sjis, euc). Example: displaying network card status ftp> quote stat 211-FTP server status: Connected to: 192.168.20.10.000.00 User logged in: root Transfer type: BINARY Data
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 110
    211-FTP directory status: Ready 211 End of status ftp> UNIX 108
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 111
    in conjunction with the relevant Macintosh manual. The latest Macintosh service packs should be installed. Supported Versions All Macintosh operating systems from OS 8.1 are supported. Printing the Network Interface Card Configuration Sheet The printer's configuration page reports information that
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 112
    2. Double-click the icon that appears on the desktop. 3. Open the MAC folder. 4. Double-click the MAC Installer icon, click Continue. 5. Click on your OS. Click Install 6. Click Quit Create the Desktop Printer. 1. Activate Chooser from the Apple menu. 2. Select your model/Appletalk and highlight the
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 113
    5. From th Printer Model drop down menu, select your printer model. Click Add. 6. Quit the Print Center. Apple Macintosh 111
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 114
    TROUBLESHOOTING The network addresses used in this manual are shown for example only. Network addresses used in your installation must be generated from your own network. Self-diagnostic test Printer does not print. Ensure the printer emulation is set to PS (if available) or Automatic. NG is printed
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 115
    printer set to Enable. Reset the network interface card to factory default settings. If DHCP, BOOTP and RARP are not used, ensure they have been set to Disable. Cannot print with lpr and ftp. Turn the printer lp by default as euc and sjis are specific to printers with PostScript
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 116
    login and the File name printed is the Transmitted file name. If the Print Directory name is indicated in the put command, the File name is not printed. The Printer name printed is the Logical Directory name. NetWare Printer Reset the network interface card to factory default the Printer name
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 117
    the NetWare login password is correct. Check the Machine name is the same as the Print Server name set in the File Server. Printer does not printer off and on again. Check the NIC is connected to the File Server. Check the printer driver has been mapped to the correct netware queue. PostScript error
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 118
    is used instead of AppleTalk.) Check the print driver is selected in the Chooser. Check the interface card is not identified. Turn the printer off and on again. Check the network MAC address. Check the computer name of the NIC is different from the computer name on the network. Troubleshooting 116
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 119
    Error writing to Prn1. Check the printer is online. If there is an error message indicating the paper has run out, add more paper and cancel the error. Check whether another user is printing. Print after the other user has finished. Troubleshooting 117
  • Oki B4300 | OkiLAN 8100 SoftNIC User's Guide - Page 120
    Oki Data Americas, Inc. 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620 Tel: (856)235-2600 Fax: (856)222-5320 http://www.okidata.com 59349901
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120