Oki B4300 OkiLAN 8100 SoftNIC User's Guide - Page 32
Printer Trap Setup, Trap Enable
View all Oki B4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Location Comments Printer Trap Setup By selecting the button, the following dialogue box is displayed: . . . In the dialogue box, the following items can be configured: Printer Trap Community Name This community name is assigned to outgoing printer status traps such as off-line, paper out, etc. TCP#1-5 Set the IP address to which a Trap packet will be sent. You can set up to five IP addresses. Detail . . . By selecting the button, the following dialogue box is displayed: In the dialogue box, the following items can be configured: Trap Enable Set sending a Trap packet, enabled or disabled, for each destination. On-Line Set sending a Trap, enabled or disabled, when the printer turns to On-Line. On-Line Set sending a Trap, enabled or disabled, when the printer turns to Off-Line. Paper Out Set sending a Trap, enabled or disabled, when paper is out. Paper Jam Set sending a Trap, enabled or disabled, when paper is out. Configuration 30