Oki B8300n Guide: Installation B8300 - Page 2

Installation Manual for B8300 and Its Peripheral Devices To install the devices efficiently, follow the procedure below. Some peripheral devices may have been installed as standard devies depending on the main unit model. Part of descriptions and illustrations may be different. Start of installation Main unit, paper feeding device, and power supply unit. B83MP / Power Suply Unit... (P. 2) B83LT / Power Suply Unit..... (P. 3) B83TT / Power Suply Unit.... (P. 4) Main unit P. 5) Duplex/bypass Yes device installed? No Finishing device Yes installed? No Hard 2 Disk Install duplex/pypass device. B83D P. 7) B83DB P. 8) Install finishing device. B83MB/Power Suply Unit... (P. 9) B83F/Power Suply Unit....... (P. 10 ) B83SS P. 11) B83THP / USP / FHP / FBP.(P. 12) Finishing device Main unit Duplex/bypass device 1 Finishing device Finishing device Main unit Duplex device Paper feeding device Paper feeding device [Electrical setting/adjustment] 1) Installation of driver software, setting, and operation check Main unit / B83H P. 13) 2) Paper guide position adjustment/off center adjustment B83MP / B83LT / B83TT / B83D / B83DB P. 14 & 15) End 1: When installing a paper feeding device, an optional power supply unit or a duplex/bypass device, be sure to reattach the rear cabinet, the AC inlet cover, and the harness cover of the main unit at the end of installation as needed. 2: When installing electrical devices, be sure to install them one at a time. 3: Only off center adjustment is needed for B83D.