Oki C830dn Optional Paper Tray Installation Instructions (English, Fran - Page 1
Oki C830dn Manual
View all Oki C830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Installation Instructions Optional Paper Tray English 1 Français 3 Español 5 Português 7 Installation Note: Two optional paper trays can be installed. 1. Unpack the tray. Remove the shipping materials. 2. Turn off the printer. Unplug the power cord. 3. Remove the interface cable. 4. Note the location of the pins (1), connector (2) and tray opening (3). 5. Lower the printer onto the auxiliary tray, aligning the printer with the tray and lowering the holes/plug in the bottom of the printer onto the pins/connector on the tray(s). 6. Check to be sure that the connection between the printer and the optional tray is secure. 7. Attach the interface cable. 8. Plug in the power cord. Turn on the printer. Check the Menu Settings for Tray2/ Tray3 Scan down to Menus on the printout and check the settings for Tray2 (Tray3). To change the settings: 1. Press Enter. 2. Press ▼ repeatedly to scroll down to Menus. Press Enter. 3. Press Enter to select Configuration. 4. Press ▼ repeatedly to scroll down to Tray 2 Config. (Tray3 Config.). Press Enter. 5. Make any needed changes. 6. Press On line to engage the settings and exit the menu. Load Paper 1. Pull out the tray and remove any packing materials. 2. Position the paper guides in the tray. Fan the paper. 1. Press Enter. 2. Press ▼ repeatedly to scroll down to Print Information. Press Enter. 3. Press Enter to select Configuration. 4. Press Enter to select Execute. The Configuration report prints.