Oki C910 C910 Setup Guide (English, Fran栩s, Espa?ol, Portugu - Page 13
Windows, Macintosh, Make the Network Connection
View all Oki C910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Available Interfaces Note Cables are not supplied with your printer. Your printer has three interfaces: Windows Network Installation Make the Network Connection Important! In order to reduce electromagnetic interference-"noise" that interferes with TVs or other appliances-you must install the included ferrite core on the network cable. Note The Ethernet cable and hub are not included with your printer. 1 Ethernet - For network cable connection of PCs and/or Macs - 10Base-T and 100Base-TX 2 USB - For direct connection to a PC or Mac. - Requires a cable conforming to USB version 2.0 or above. 3 Parallel (Windows only) - For direct connection to a PC. - Requires a bi-directional parallel cable (compatible with IEEE-1284) 1 Turn off the printer. 2 Turn off the computer. 3 Loop the cable as shown and place the ferrite core supplied with the printer about 1 inch (25 mm) from the connector on the printer end. Installation Procedures Windows Network Installation, see below. USB Installation, see page 15. Parallel Port Installation, see page 15. Macintosh Network installation, see page 16. USB Installation, see page 17. 13 - English