Oki C9600n OkiLAN 510w Configuration Guide - Page 17

Communication Mode = AUTO or 802.11b

Get Oki C9600n PDF manuals and user guides View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

5. On the [General] tab, click [Change SLOT], then click [Yes]. 6. Referring to the Network Summary printout for the wireless card (under General Information), enter the last six digits of the Mac address as the password (minus any punctuation), then click [OK]. 7. Scroll over to the far right and click the [Wireless] tab. 8. Make your selections: • Network Type = Ad Hoc • Communication Mode = AUTO or 802.11b • SSID = (name you select) • Authentication = Open or Shared Key (WEP) • Channel = 1 through 13 (to ensure speed and accuracy when using wireless access points which are near each other, be sure to leave 5 blank channels between assigned channels; e.g., select channels 1 / 6 / 11) • SSID = (name you select) 9. Click [Initialize]. 17 Configuration: Ad Hoc Mode

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
17
Configuration: Ad Hoc Mode
5.
On the [General] tab, click [Change SLOT], then click
[Yes].
6.
Referring to the Network Summary printout for the
wireless card (under General Information), enter the last
six digits of the Mac address as the password (minus any
punctuation), then click [OK].
7.
Scroll over to the far right and click the [Wireless] tab.
8.
Make your selections:
•
Network Type = Ad Hoc
•
Communication Mode = AUTO or 802.11b
•
SSID = (name you select)
•
Authentication = Open or Shared Key (WEP)
•
Channel = 1 through 13 (to ensure speed and accuracy
when using wireless access points which are near each
other, be sure to leave 5 blank channels between
assigned channels; e.g., select channels 1 / 6 / 11)
•
SSID = (name you select)
9.
Click [Initialize].