Home » Oki Manuals » Printers » Oki C9600n » Manual Viewer

Oki C9600n OkiLAN 510w Configuration Guide - Page 5

Pecifications, Esetting, Actory, Efaults

Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

SPECIFICATIONS IEEE • 802.11b • 802.11g SECURITY: Authentication Encryption WEP Shared Key WEP 64 or 128 bits WPA-Home WPA-PSK TKIP WPA-Enterprise EAP-TLS TKIP PROTOCOL TCP/IP COEXISTENCE WITH WIRED PRINT SERVER • Both can work simultaneously as independent interfaces • Each has separate configuration (including IP Address) and separate certificates. • Packet routing is not performed between the two. RESETTING TO FACTORY DEFAULTS ________ To reset the wireless card to the factory default settings: 1. Turn off the printer. 2. Press and hold the TEST button on the wireless card while turning the printer back on. Keep pressing the button until Wait a Moment Network Initializing appears on the display. 3. Wait for Ready to Print to appear. 5 Basic Information

Section	Page
Contents	3
Basic Information	4
Self-Diagnostic Test	4
Specifications	5
Resetting to Factory Defaults	5
Configuration Overview	6
Network Modes	6
Ad-Hoc	6
Infrastructure	6
SSID (Service Set Identifier)	7
Channels	7
Security Features	8
Open (no security)	8
WEP	8
WPA	8
EAP (Using Certificates)	8
Client Certificates	8
CA Certificates	8
Summary of Configuration Modes	10
Ad Hoc Mode	10
Infrastructure Mode	10
Telnet Mode	10
Control Panel Mode	10
Configuration: Ad Hoc Mode	12
IP Address	12
For the Wireless Card	12
For the Wireless Computer	13
Configuration	13
Configuration Using Web Browser	13
Configuration Using AdminManager	16
Configuration: Infrastructure Mode	18
IP Address	18
For the Wireless Card	18
For the Computer	19
Configuration	19
Configuration Using Web Browser	19
Setting Up EAP Using Web Browser	25
Configuration Using AdminManager	30
Setting Up EAP Using AdminManager	34
Configuration: Telnet	38
Configuring Using Telnet	38
Configuration: Printer Control Panel	41