Oki C9600n Banner Tray Installation Instructions - Page 2
and pull back so it is secure.
 |
View all Oki C9600n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
6. Flip the sub-stacker (a) in the direction indicated by the arrow so that it rests on the plastic piece that extends from the printer (b). Be sure the sub-stacker is in place before you go to the next step. 8. Insert the sheet guide into the holes in the guide base. a b 7. Hook the stacker to the shaft of the guide base and pull back so it is secure. 9. Flip the stacker over onto the guide base. 2
-
1 -
2 -
3 -
4
 |
 |
2
6.
Flip the sub-stacker (
a
) in the direction indi-
cated by the arrow so that it rests on the plastic
piece that extends from the printer (
b
). Be sure
the sub-stacker is in place before you go to the
next step.
7.
Hook the stacker to the shaft of the guide base
and pull back so it is secure.
8.
Insert the sheet guide into the holes in the
guide base.
9.
Flip the stacker over onto the guide base.
b
a