Oki C9650dn Network and Configuration Guide

Oki C9650dn Manual

Get Oki C9650dn PDF manuals and user guides View all Oki C9650dn manuals
Add to My Manuals
Save this manual to your list of manuals

Oki C9650dn manual content summary:

  • Oki C9650dn | Network and Configuration Guide - Page 1
  • Oki C9650dn | Network and Configuration Guide - Page 2
    2007 Oki Data Americas, Inc. All rights reserved. Document Information C9650 Network And Configuration Guide drivers and manuals are available from the Oki web site: http://www.okiprintingsolutions.com Trademark Information Oki, Oki Printing Solutions and Microline are registered trademarks of Oki
  • Oki C9650dn | Network and Configuration Guide - Page 3
    CONTENTS Copyright Information 2 Contents 3 Notes, cautions and warnings 6 Introduction 7 Sections 8 Specifications 9 Network summary printout 11 Configuration methods 12 Section 1: configuring the print server 13 Using the adminmanager quick setup 14 Introduction 14 Using quick setup 15
  • Oki C9650dn | Network and Configuration Guide - Page 4
    printer to the utility 57 Using Oki LPR 57 Section 3: printing from Windows 58 Installing a network printer 59 Using the oki driver installer 59 Why use the oki driver installer 59 Using the add printer 81 Configuring printer hardware options 82 Section 5: troubleshooting 83 Network
  • Oki C9650dn | Network and Configuration Guide - Page 5
    of paper 89 Mac OS X 10.2.3 or greater 89 Mac OS 10.2.3 - 10.2.8 only 89 No printing or print queue stopped 90 Appendix: the printer menu 91 Menu Basics 91 Top Level Functions 91 Special Menu 91 Overview 91 Table Conventions Used 91 Functions Menu Tree: Admin Setup, Calibration, Print
  • Oki C9650dn | Network and Configuration Guide - Page 6
    NOTES, CAUTIONS AND WARNINGS NOTE A note provides additional information to supplement the main text. CAUTION! A caution provides additional information which, if ignored, may result in equipment malfunction or damage. WARNING! A warning provides additional information which, if ignored, may result
  • Oki C9650dn | Network and Configuration Guide - Page 7
    this manual are interface. This network print server supports IEEE 802.2, IEEE 802.3, Ethernet-II and SNAP, settings. You can also restrict access by disabling network services, protocols, and ports you are not using. You Printer Menu settings to Auto or PS before printing the network
  • Oki C9650dn | Network and Configuration Guide - Page 8
    print server" on page 13 > "Section 2: utilities" on page 49 > "Section 3: printing from Windows" on page 58 > "Section 4: printing using MacOS" on page 62 > "Section 5: troubleshooting" on page 83 Introduction > 8
  • Oki C9650dn | Network and Configuration Guide - Page 9
    , TELNET, HTTP, IPP, BOOTP, DHCP, SNMP, DNS, SMTP, POP3 • IPX/SPX (NetWare) - Remote printer mode (up to eight file servers and 32 queues) - Print server mode (up to eight print servers) - Encrypted password supported in print server mode - SNMP • EtherTalk:ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP
  • Oki C9650dn | Network and Configuration Guide - Page 10
    Print Service Functions • LPR • FTP • Port 9100 • Web Direct Printing • QSERVER Binder • QSERVER NDS • Self-diagnostic test printing • Banner supported • Monitoring/configure by Web browser • Printer status notification by E-Mail Introduction > 10
  • Oki C9650dn | Network and Configuration Guide - Page 11
    on. 2. Press the print server Test button for more than three seconds and release. The printer's MAC Address (Ethernet address) appears on the first page under General Information. The first six digits of the MAC Address are the same for all
  • Oki C9650dn | Network and Configuration Guide - Page 12
    IP, EtherTalk, NetBEUI protocols. • Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. • Zone name and Port name for EtherTalk. Windows* • Vista • server and printer by using a Web browser. Microsoft Internet Explorer or similar. Operating system that supports the Web
  • Oki C9650dn | Network and Configuration Guide - Page 13
    SECTION 1: CONFIGURING THE PRINT SERVER This section explains the various ways you can configure your print server. It consists of the following: > "Using the adminmanager quick setup" on page 14 > "Using a web browser" on page 17 > "Using adminmanager standard setup" on page 22 > "Using TELNET" on
  • Oki C9650dn | Network and Configuration Guide - Page 14
    the following: > Enable/disable TCP/IP, EtherTalk, NetBEUI protocols. > Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. > Set NetWare mode and create Queue/Print Server/Printer objects. > Zone name and Port name for EtherTalk. Using the adminmanager quick setup > 14
  • Oki C9650dn | Network and Configuration Guide - Page 15
    USING QUICK SETUP 1. Insert the Network & Utilities CD into the CD-ROM drive and wait for it to autorun. If the installer does not start automatically, click Start > Run and enter E:\Setup (where E is your CD-ROM drive) in the Open field, then click OK. 2. Select the appropriate language. 3. Accept
  • Oki C9650dn | Network and Configuration Guide - Page 16
    7. Select Oki Device Quick Setup and follow the on-screen instructions. 7 8. When you are done making your selections, review them and if they are correct, click Execute. The new settings are transmitted to the network card, but the network card is still operating with
  • Oki C9650dn | Network and Configuration Guide - Page 17
    If the print server is connected to the network using TCP/IP, its settings and the printer menu settings can be configured using a Web browser. NOTE The network addresses used in this manual are shown for example only. Network addresses used in your installation should be within in the appropriate
  • Oki C9650dn | Network and Configuration Guide - Page 18
    3. Enter the print server's IP Address. 4. Press the ENTER key. The Printer Status window displays. NOTE You can also launch the web browser from within the AdminManager utility. To do this, highlight the appropriate print server, then
  • Oki C9650dn | Network and Configuration Guide - Page 19
    8. Enter "root" for the User Name and your password-the default is the last six digits of the MAC address (case sensitive, use uppercase)-under Password. 9. Click OK. 10. Click Skip to navigate to the main menu page. Using a web browser > 19
  • Oki C9650dn | Network and Configuration Guide - Page 20
    11. In the left column, click the category for which you wish to make changes. 12. When you are finished, click Submit to send the changes to the print server. NOTE For information on setting up security features using the web browser refer to the Security Guide. Using a web browser > 20
  • Oki C9650dn | Network and Configuration Guide - Page 21
    CHANGING THE PASSWORD 1. Open the browser and enter the IP Address for the print server, then login with your current password. 2. Click Security > Password Configuration. 3. Under Administrator(root/admin) Password Configuration, enter the new password, then enter it again under Confirm New Admin
  • Oki C9650dn | Network and Configuration Guide - Page 22
    to the network with TCP/IP or IPX/SPX. > This utility must be used on a PC that is located in the same segment as the printer. Using adminmanager standard setup > 22
  • Oki C9650dn | Network and Configuration Guide - Page 23
    INSTALLING ADMINMANAGER 1. Insert the Network & Utilities CD into the CD-ROM drive and wait for it to autorun. If the installer does not start automatically, click Start > Run and enter E:\Setup (where E is your CD-ROM drive) in the Open field, then click OK. 2. Select the appropriate language. 3.
  • Oki C9650dn | Network and Configuration Guide - Page 24
    Oki Device Standard Setup. 7 The Welcome window displays. Here you can choose: > run the utility from the CD Execute from CD-ROM > load the utility onto your hard drive and run it from there Install and Execute 8. Click Next. (a) If you selected Install and Execute, follow the onscreen instructions
  • Oki C9650dn | Network and Configuration Guide - Page 25
    in your network which have an Oki compatible network card installed. > Exit Exit the program. STATUS MENU > Printer Status Displays the current status of the printer. > System Status Displays the current network card configuration. The configuration data can be saved as a log file. > List of
  • Oki C9650dn | Network and Configuration Guide - Page 26
    General Tab (Oki Device Setup) The General tab allows you to change the admin password. 1. Click Change. 2. Enter the current value, then enter the new value and re-
  • Oki C9650dn | Network and Configuration Guide - Page 27
    TCP/IP Tab (Oki Device Setup) ITEM Use TCP/IP Protocol Use DHCP/BOOTP Use IPv6 Use Windows Rally IP Address Subnet Mask Default Gateway Auto Discovery... DNS Server...
  • Oki C9650dn | Network and Configuration Guide - Page 28
    Netware Tab (Oki Device Setup) ITEM Use NetWare Protocol Use IPX Protocol Use TCP/IP Protocol Print Server Name Frame Type Operation Mode Bindery Setup check box. Bindery Setup NDS Setup COMMENTS Enable/disable NetWare protocol. Click to deselect if you do not wish to use IPX. Click this to
  • Oki C9650dn | Network and Configuration Guide - Page 29
    servers to connect. Time Out Set the duration from the last data's arrival to freeing of the port, in seconds. Set the NetWare printer object name. EtherTalk Tab (Oki Device Setup) ITEM Use EtherTalk Protocol Printer Name Zone Name COMMENTS Enable/disable EtherTalk protocol. Set the EtherTalk
  • Oki C9650dn | Network and Configuration Guide - Page 30
    NetBEUI Tab (Oki Device Setup) ITEM COMMENTS Use NetBEUI Protocol Short Printer Name Workgroup Comment Enable/disable NetBEUI protocol. Set a name for the print server. Set a name for the work group to which the print server belongs.
  • Oki C9650dn | Network and Configuration Guide - Page 31
    SNMP Tab (Oki Device Setup) ITEM Use SNMP Service SNMPv1 settings SNMPv3 settings SysContact SysName SysLocation COMMENTS Options to Setup and Delete. Set the printer manager name. Set the printer model name. Set the location where the printer is installed. Using adminmanager standard setup >
  • Oki C9650dn | Network and Configuration Guide - Page 32
    #1 through TCP #5] Click to enable sending a Trap packet for any or all of the following selectable conditions: Printer Reboot Receive Illegal Online Offline Paper Out Paper Jam Cover Open Printer Error IPX Set node address and network address to which a Trap packet will be sent. Detail... [for
  • Oki C9650dn | Network and Configuration Guide - Page 33
    E-mail(Send) Tab ITEM Use SMTP Transmit SMTP Server Name Printer E-mail Address Destination Address 1... through 5... COMMENTS Enable/disable sending E-mail using SMTP. Set the host name of the SMTP server. Set the E-mail address that
  • Oki C9650dn | Network and Configuration Guide - Page 34
    ITEM Attach Info... Comment... Authentication... Others... COMMENTS Select whichever information is to be included in the E-mail. Set up to four lines of text to be included with the E-mail as comments. Used to set the following security information: Use SMTP Enable/disable SMTP authentication
  • Oki C9650dn | Network and Configuration Guide - Page 35
    (Receive) Tab (Oki Device Setup) The print server supports an e-mail reception function (POP3) allowing the printer to print PDF and text files attached to emails. Not all printers support this function. If the email receive tab is not displayed, your printer does not support this function. ITEM
  • Oki C9650dn | Network and Configuration Guide - Page 36
    Enable/disable domain filtering. Filter Policy Select ACCEPT (the default) or DENY. Domain Filter Define up to five domain filters. SNTP Tab (Oki Device Setup) ITEM Use SNTP NTP Server 1 Address NTP Server 2 Address Adjust Interval Local Time Zone Daylight Saving COMMENTS Enable/disable SNTP
  • Oki C9650dn | Network and Configuration Guide - Page 37
    Maintenance Tab (Oki Device Setup) ITEM LAN Scale IP Filter Setup... COMMENTS Select NORMAL (the default) or SMALL. The following items can be configured: Use IP FIlter Enable/disable IP Filtering. Default is disabled. Admin IP Address Enter the printer's IP Address. IP Address Range Set
  • Oki C9650dn | Network and Configuration Guide - Page 38
    be selected by clicking their check box. TCP/IP Protocol NetBEUI Protocol NetWare Protocol EtherTalk Protocol FTP Service Use Telnet Service Use Web Service Use SNMP Service Use POP3 Protocol Use SNTP Use encrypted communication for configuration data SSL/TLS Tab (Oki Device Setup) ITEM Encryption
  • Oki C9650dn | Network and Configuration Guide - Page 39
    within an organisation's internal network (intranet). When Self-signed Certificate is selected, the following items are configured: Common Name The printer's IP Address appears here. Organisation Enter the name of your organization. Organisation Unit Optional. Allows you to enter a subdivision
  • Oki C9650dn | Network and Configuration Guide - Page 40
    security when printing over the internet. Requires an outside certification service which must be purchased separately. When CA-signed Certificate is selected, the following items are configured: Common Name The printer's IP Address appears here. Organisation Enter the name of your
  • Oki C9650dn | Network and Configuration Guide - Page 41
    IEEE802.1X Tab (Oki Device Setup) ITEM Use IEEE802.1X EAP Type Use SSL/TLS Certificate Authenticate server Certificate COMMENTS Enable/disable The following items can be configured: EAP-
  • Oki C9650dn | Network and Configuration Guide - Page 42
    in your environment to access the selected printer's TELNET port. NOTE The TELNET application is not included as part of the print server package. Install the TELNET package on to your system. For further information, see your Windows manual. > Reset Resets the selected network interface card
  • Oki C9650dn | Network and Configuration Guide - Page 43
    protocol. The default is enabled. If disabled, the search will not be carried out using TCP/ IP. Set broadcast addresses that are used to search Oki network interface cards using the TCP/IP protocol. Click Add to add the address to the list in the
  • Oki C9650dn | Network and Configuration Guide - Page 44
    networks that it can detect. Set network addresses that are used to search Oki network interface cards via NetWare protocol. If there any many NetWare file servers have entered to the list box. Select a network number in the list box, then click Delete to remove it. Using adminmanager standard setup >
  • Oki C9650dn | Network and Configuration Guide - Page 45
    SNMP Tab (Environmental Setup) ITEM Obtain the printer name via SNMP Community name Add Delete COMMENTS Enable/disable. Set a community name. Click to add the entry to the list box. Select an entry in the list box, then click Delete to remove it. Using adminmanager standard setup > 45
  • Oki C9650dn | Network and Configuration Guide - Page 46
    Tab (Environmental Setup) ITEM COMMENTS Set Timeout: Printer Search Set Timeout: Data Send/Receive Search Every (20-180sec) Set the seconds. Retry (1-5) Sets how many times AdminManager will retry to transmit/receive data to/from the network interface card. Default is 3 retries. HELP MENU
  • Oki C9650dn | Network and Configuration Guide - Page 47
    IP address 172.168.20.127: ping 172.168.20.127 If there is no reply, there is a problem with the configuration of the IP address (the IP address has been already set manually or by the DHCP/RARP server), or with the network. Reset the network interface card settings to the
  • Oki C9650dn | Network and Configuration Guide - Page 48
    ". login: root 'root' user needs password to login. password: User 'root' logged in. No. MENU (level.1 1:Status / Information 2:Printer Config 3:Network Config 4:Security Config 5:Maintenance 99:Exit setup Please select (1-99)? 3. Enter the number of the item to be changed. The details window
  • Oki C9650dn | Network and Configuration Guide - Page 49
    SECTION 2: UTILITIES This section covers the following: > "PrintSuperVision management utility" on page 50 > "Oki LPR printing utility" on page 55 Section 2: utilities > 49
  • Oki C9650dn | Network and Configuration Guide - Page 50
    all utilities are supported by every operating system. Please check with your User's Guide and your system support website for latest discovering and configuring printers connected to the network. > Locating printers visually on maps. > Monitoring devices over time and saving data for statistical
  • Oki C9650dn | Network and Configuration Guide - Page 51
    and .Net Framework version 1.1 included as part of PSV install. Internet Service Manager included in the OS. Available in the Windows 2000 CD. Install 2.8 and .Net Framework version 1.1 included as part of PSV install. Supported browsers > Internet Explorer (IE) 6.0 and above > Firefox 1.5 and
  • Oki C9650dn | Network and Configuration Guide - Page 52
    all the listed browsers are supported, PrintSuperVision works best when used with Internet Explorer. Supported printers PrintSuperVision provides general management information for Oki and non-Oki printers connected to the network. For Oki printers additional details, reports and added features
  • Oki C9650dn | Network and Configuration Guide - Page 53
    License Agreement if you have not previously accepted it and select Internet Downloads. 3. Click PrintSuperVision to begin installation. 4. Follow the on-screen instructions. When the installation ends, the Setup complete window is displayed. 5. Click Finish. PrintSuperVision management utility > 53
  • Oki C9650dn | Network and Configuration Guide - Page 54
    RUNNING PRINTSUPERVISION TO RUN PRINTSUPERVISION SERVER (MACHINE ON WHICH IT IS INSTALLED) Either: > Click Start > Programs > PrintSuperVision > PrintSuperVision > Double-click the PrintSuperVision icon on the desktop for the PrintSuperVision server TO RUN PRINTSUPERVISION FROM A CLIENT PC 1. Open
  • Oki C9650dn | Network and Configuration Guide - Page 55
    or 2000 with TCP/IP protocol installed and Oki printers that support TCP/IP. INSTALLING OKI LPR NOTE OkiLPR may already be installed if you used the Oki installer program. OkiLPR is installed automatically for a network printer when the driver is installed. Installation consists of two steps: > Step
  • Oki C9650dn | Network and Configuration Guide - Page 56
    an open window, select Register in Startup. > To automatically launch the program minimized as an icon, select Launch as minimized. To open the Oki LPR UTILITY window, click the icon. 6. Click Next. 7. Verify the program folder name and click Next. The installation starts. 8. When the installation
  • Oki C9650dn | Network and Configuration Guide - Page 57
    address can cause serious problems on your network. 1. With the utility open, click the Remote Print pull-down menu and select Add Printer. 2. Fill in printer. When the Discovery window opens, click the printer in the box, then click OK. 3. Click OK. The printer is added to the main window. USING OKI
  • Oki C9650dn | Network and Configuration Guide - Page 58
    systems and this is a good reference point for the exact details of each configuration option within Windows. NOTE Not all utilities are supported by every operating system. Please check with your User's Guide and your support website for latest information. Section 3: printing from Windows > 58
  • Oki C9650dn | Network and Configuration Guide - Page 59
    it yourself using Add Printer Wizard (Windows) USING THE OKI DRIVER INSTALLER The Oki driver installer program searches for compatible printers on the network and installs and configures the printer drivers with the correct port settings automatically. Using the Oki driver installer program, you can
  • Oki C9650dn | Network and Configuration Guide - Page 60
    that allows users to discover and configure network devices effortlessly. Windows standard TCP/IP port The standard TCP/IP port simplifies connecting to remote printers using the TCP/IP protocol. A computer that acts as a print server must run the TCP/IP protocol in order to print. You can configure
  • Oki C9650dn | Network and Configuration Guide - Page 61
    (NetBios Extended User Interface) is a protocol that was designed for use on small workgroups or LANs. Within Windows, NetBEUI is used for file and printer sharing between computers. It provides a simple method of printing, but the protocol does have limitations and is not as robust as TCP/IP or IPX
  • Oki C9650dn | Network and Configuration Guide - Page 62
    4: PRINTING USING MACOS This section covers the following: > "Overview" on page 63 > "Network summary printout" on page 64 > "MacOS printer setup utility" on page 65 > "Connecting to your printer" on page 76 > "Configuring printer hardware options" on page 82 Section 4: printing using MacOS > 62
  • Oki C9650dn | Network and Configuration Guide - Page 63
    by the PPD file includes: > Supported paper types > Paper trays > Printer resolution > Printer color matching NOTE The PPD file must be installed using the Oki Driver Installer to ensure that all essential files are copied. SETTING UP A NETWORK PRINTER 1. If the printer does not already have an IP
  • Oki C9650dn | Network and Configuration Guide - Page 64
    's MAC Address (Ethernet address), required for MacOS configuration. 1. Turn the printer on. 2. Press the print server Test button for more than three seconds and release. The MAC Address appears on the first page under General Information.
  • Oki C9650dn | Network and Configuration Guide - Page 65
    utility for configuring all print server functions using a graphical user interface. INSTALLING THE PRINTER SETUP UTILITY 1. Insert the Network & Utilities CD into the CD-ROM drive. 2. Open the Printer Setup Utility folder and double-click Installer. 3. Select the destination directory, then click
  • Oki C9650dn | Network and Configuration Guide - Page 66
    the Yes option is selected to activate the utility, then click Finish. THE PRINTER SETUP UTILITY INTERFACE The Printer Setup Utility auto-discovers Oki compatible network cards. 1. Select the correct printer to configure and choose Setup menu > Oki Device Setup. MacOS printer setup utility > 66
  • Oki C9650dn | Network and Configuration Guide - Page 67
    marks. e.g., for a MAC (Ethernet) Address of 00:80:87:A4:55:79, the password would be A45579. 3. Select the TCP/IP tab and assign your printer's IP address. 4. Click Apply. MacOS
  • Oki C9650dn | Network and Configuration Guide - Page 68
    MENU OPTIONS DISCOVER PRINTERS Locates and lists all printers in your network which have an Oki compatible network card installed. PRINTER STATUS MONITOR Displays the current status of the printer. PRINTER NIC CARD SUMMARY Displays the network card summary details. CHANGE SETTINGS Use this to
  • Oki C9650dn | Network and Configuration Guide - Page 69
    the subnet mask of the selected network interface card. Set the default gateway of the selected network interface card. Use to enable/disable IPv6. MacOS printer setup utility > 69
  • Oki C9650dn | Network and Configuration Guide - Page 70
    Netware Tab ITEM Use NetWare Protocol Print Server Name Frame Type Operation Mode Bindery Setup NDS Setup Printer Name COMMENTS Enable/disable NetWare protocol. Set a Print Server name. Set the primary NetWare frame type. Select the NetWare mode: PSERVER Mode (the default) RPRINTER
  • Oki C9650dn | Network and Configuration Guide - Page 71
    EtherTalk Tab ITEM Use EtherTalk Protocol Printer Name Zone Name COMMENTS Enable/disable EtherTalk protocol. Set the EtherTalk Printer object name. Set the name of the zone to which the print server belongs. MacOS printer setup utility > 71
  • Oki C9650dn | Network and Configuration Guide - Page 72
    NetBEUI Tab ITEM COMMENTS Use NetBEUI Protocol Short Printer Name Workgroup Comment Enable/disable NetBEUI protocol. Set a name for the print server. Set a name for the work group to which the print server belongs. Set the comments for the print server. MacOS printer setup utility > 72
  • Oki C9650dn | Network and Configuration Guide - Page 73
    SNMP Tab ITEM SysContact SysName SysLocation COMMENTS Set the printer manager name. Set the printer model name. Set the location where the printer is installed. OPEN WEB BROWSER Displays the printer web page. CHANGE UTILITY PREFERENCES Use this to configure the utility preferences for broadcast
  • Oki C9650dn | Network and Configuration Guide - Page 74
    ITEM Set Broadcast Address Add Delete COMMENTS Set broadcast addresses that are used to search Oki network interface cards using the TCP/IP protocol. Click Add to add the address to the list in the box. Select an address in the box, then click Delete to remove it. MacOS printer setup utility > 74
  • Oki C9650dn | Network and Configuration Guide - Page 75
    Timeout Tab (Environmental Setup) ITEM COMMENTS Set Timeout: Printer Search Set Timeout: Data Send/Receive Search Every (20-180sec) Set the response waiting time from the network card in seconds. Default is 30 seconds. Time Outs (1-60sec) Set
  • Oki C9650dn | Network and Configuration Guide - Page 76
    folder. 2. Click Add.... 3. Select your printer model from the Default Browser. 4. Click Add. 5. Depending on the connection type, you may be prompted to configure any additional printer hardware options. If your printer has options such as a hard disk or second tray, switch on the relevant options
  • Oki C9650dn | Network and Configuration Guide - Page 77
    . 6. Check the correct PPD file for your printer is selected in the Print Using menu. 7. Click Add.... 8. You will be prompted to configure any additional printer hardware options. If your printer has options such as a hard disk or second tray, switch on the relevant options. 9. Click Continue
  • Oki C9650dn | Network and Configuration Guide - Page 78
    folder. NOTE > This utility is called Print Center on Mac OS X 10.2.x. > If your printer is already listed, your Mac may already have discovered the printer before you installed the Oki software. In this case, the printer may be using the incorrect PPD file or may not have the correct hardware
  • Oki C9650dn | Network and Configuration Guide - Page 79
    folder. NOTE > This utility is called Print Center on Mac OS X 10.2.x. > If your printer is already listed, your Mac may already have discovered the printer before you installed the Oki software. In this case, the printer may be using the incorrect PPD file or may not have the correct hardware
  • Oki C9650dn | Network and Configuration Guide - Page 80
    hardware options" on page 82. APPLETALK CONNECTION If you have not already done so, run the Oki software installer before following the steps below. 1. Start the Printer Setup Utility. This is located in the Applications > Utilities folder. NOTE This utility is called Print Center on Mac OS X 10
  • Oki C9650dn | Network and Configuration Guide - Page 81
    folder. NOTE > This utility is called Print Center on Mac OS X 10.2.x. > If your printer is already listed, your Mac may already have discovered the printer before you installed the Oki software. In this case, the printer may be using the incorrect PPD file or may not have the correct hardware
  • Oki C9650dn | Network and Configuration Guide - Page 82
    IP and Rendezvous network connections only. If you have added additional hardware, for example additional paper trays, to your printer these must be enabled in the printer driver. 1. Start the Printer Setup Utility. This is located in the Applications > Utilities folder. NOTE This utility is called
  • Oki C9650dn | Network and Configuration Guide - Page 83
    SECTION 5: TROUBLESHOOTING NOTE The network addresses used in this manual are shown for example only. Network addresses used in your installation should be within in the summary printout" on page 84 > "TCP/IP" on page 85 > "NetBEUI" on page 87 > "Mac" on page 88 Section 5: troubleshooting > 83
  • Oki C9650dn | Network and Configuration Guide - Page 84
    cable is correctly connected. > Connect to a different network segment, re-print the summary and see if this fixes the problem. EEPROM CHECK REGISTERS AN ERROR > Confirm that the NIC is installed correctly and turn the printer off and on again. > Initialize the NIC. Network summary printout > 84
  • Oki C9650dn | Network and Configuration Guide - Page 85
    ping command. > Make sure the network cable is correctly connected and that the green LED close to the printer's network interface is lit. If not, change the cable and try again. > Run the Self-diagnostic test (with printer on, press and hold the Test button on the print server for 3 seconds, then
  • Oki C9650dn | Network and Configuration Guide - Page 86
    name printed is the transmitted file name. If the print directory name is indicated in the put command, the file name is not printed. The printer name printed is the logical directory name. TCP/IP > 86
  • Oki C9650dn | Network and Configuration Guide - Page 87
    THE NETWORK INTERFACE CARD IS NOT IDENTIFIED > Turn the printer off for 15 seconds and then on again. > Make NIC is different from the computer name on the network. ERROR WRITING TO PRN1 > Make sure the printer is online. > If there is an error message indicating the paper has run out, add more
  • Oki C9650dn | Network and Configuration Guide - Page 88
    by the data being sent to the printer in binary format. The printer may not be able to understand data in this data as ASCII. Choose this option, and print your document. For example, in Adobe Photoshop 7 or Adobe Photoshop CS: 1. Click the File menu and select Print with Preview. 2. Click the box
  • Oki C9650dn | Network and Configuration Guide - Page 89
    does not apply. In such cases, if the Oki PPD file is selected in Quark or Freehand's print dialogue, the print job will be incorrectly rotated by 90 degrees. The Oki printer driver contains a Page Rotate option - this may be used to fix the problem. Alternatively, you may be able to rotate the
  • Oki C9650dn | Network and Configuration Guide - Page 90
    , the job disappears completely and is not printed, or the job remains stalled in Printer Setup Utility (Print Center). Cause: The Oki printer PostScript Printer Description (PPD) file has a dependency on a filter file. This filter file must be installed the following location: /usr/libexec/cups
  • Oki C9650dn | Network and Configuration Guide - Page 91
    the Admin Setup, Calibration, Print Statistics and BootMenu trees. The remainder of the menus above are described in Appendix B of the on-line printer User's Guide. TABLE CONVENTIONS USED > The menu trees are given to the lowest menu item level. Typically, this can be a parameter that can be set
  • Oki C9650dn | Network and Configuration Guide - Page 92
    EtherTalk Frame Type IP Address Set IP Address Subnet Mask Gateway Address Web Telnet FTP SNMP Network Scale Hub Link Setting Factory Defaults Appendix: the printer menu > 92
  • Oki C9650dn | Network and Configuration Guide - Page 93
    Offset Output Bin Finisher Setup Media Check Transparency Detect Resolution Toner Save Mode Mono-print speed Default Orientation Form Length Page Skip CR Function LF Function Print Margin True Black Pen-width Adjust Tray ID# Character Pitch Font Condense Character Set Symbol Set Letter O Style Zero
  • Oki C9650dn | Network and Configuration Guide - Page 94
    Mode Ink Simulation UCR CMY 100% Density CMYK Conversion Receive Buffer Size Resource Save Initialize Resize PS Area Initialize Resize Partition Format Partition Near Life LED New Password Verify Password Reset Settings Save Settings Restore Settings Appendix: the
  • Oki C9650dn | Network and Configuration Guide - Page 95
    +1, +2 Execute Execute Off -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 Execute Highlight Mid-Tone Dark Highlight Mid-Tone Dark Highlight Mid-Tone Dark Highlight Mid-Tone Dark 0, +1, +2, +3, -3, -2, -1 0, +1, +2, +3, -3, -2, -1 0, +1, +2, +3, -3, -2, -1 0, +1, +2, +3, -3, -2, -1 Appendix: the printer menu > 95
  • Oki C9650dn | Network and Configuration Guide - Page 96
    FUNCTION SUBMENU 1 Print Statistics (see page 114) Enter Password Statistics Log Log Size Reset Counter Change Password New Password Verify Password SUBMENU 2 - Enable Disable 1 ~ 30 ~ 100 Execute - - - Appendix: the printer menu > 96
  • Oki C9650dn | Network and Configuration Guide - Page 97
    Limitation Reset Cipher Key Check File System Check All Sectors Enable HDD Erase HDD Enable Initialization Peak Power Control Power Save Moisture Control Appendix: the printer menu > 97
  • Oki C9650dn | Network and Configuration Guide - Page 98
    Online button to exit menu mode and return to the Ready to print status. Example: Enabling FTP 1. Ensure that the LCD panel indicates that the printer is ready to print. 2. Press the Enter button to switch to the Menu mode. 3. With Configuration highlighted, press the Enter button to select this
  • Oki C9650dn | Network and Configuration Guide - Page 99
    to exit menu mode and return to the Ready to print status. MAKING CHANGES IN THE BOOT MENU 1. Turn the printer OFF. 2. Press and hold the Enter button while turning the printer back on. NOTE Keep pressing the Enter button until INITIALISING appears on the display. 3. Use the Up-arrow or Down
  • Oki C9650dn | Network and Configuration Guide - Page 100
    PRINTER MENU: FUNCTIONS LIST ADMIN SETUP Password ITEM Enter password VALUE nnnn DESCRIPTION /Disables the EtherTalk protocol. Auto 802.2 802.3 Ethernet II SNAP Sets the frame type (NetWare). Auto Manual Sets IP address setup method (TCP/IP). xxx.xxx.xxx.x Sets the IP address (TCP/IP). xx
  • Oki C9650dn | Network and Configuration Guide - Page 101
    work effectively even when connected to a HUB that has a spanning tree feature. However, printer start up time gets longer when computers are connected to two or three small LANs. Duplex ON OFF DESCRIPTION Selects a printer language. Sets number of copies. Disabled for local print, except for demo
  • Oki C9650dn | Network and Configuration Guide - Page 102
    the print data matches that of the tray. Only standard sizes can be checked. Transparency detect Auto Disable Enables/Disables the automatic detection of transparencies. (Use it while detecting sensor mistakes). Resolution 600dpi 600x1200dpi 600dpi multi-level Sets the resolution. Toner save
  • Oki C9650dn | Network and Configuration Guide - Page 103
    to the direction of motion of paper. Sets default Custom paper length, in the same direction as the direction of motion of paper. Appendix: the printer menu > 103
  • Oki C9650dn | Network and Configuration Guide - Page 104
    appear for Non-PS type. Specifies PS transmission protocol for Centronics data. It does not appear for Non-PS type. Specifies PS transmission protocol for USB data. It does not appear for Non-PS type. PCL Setup default fonts. Sets the height of the PCL default font. Appendix: the printer menu > 104
  • Oki C9650dn | Network and Configuration Guide - Page 105
    Sets line width subject to Auto LF with A4 paper in PCL. ON OFF Sets to eject a page with nonprint data (blank page) on receipt of the FF command (0CH) in PCL. Set to OFF for ejection. CR CR width is emphasized to look wider. OFF: the line appears as specified. Appendix: the printer menu > 105
  • Oki C9650dn | Network and Configuration Guide - Page 106
    , Tray3, Tray4, and Tray5 for the paper feed destination command in PCL5e emulation. Sets the number to specify MP Tray for the paper feed destination command in PCL5e emulation. IBM PPR Setup , PC-858, Roman-9, ISO L9 Enable Disable Sets the letter O style. Appendix: the printer menu > 106
  • Oki C9650dn | Network and Configuration Guide - Page 107
    from the top edge of the paper. Sets the print position from the left edge of the paper. Sets the print mode that fits print data equivalent to 11 inch (66 lines) into Letter size printable area. Sets character height. Same: same height, regardless of CPI. Diff: character heights vary according
  • Oki C9650dn | Network and Configuration Guide - Page 108
    . 11 inch 11.7 inch 12 inch Sets the paper length. 0.0 inch 0.1 ~ 1.0 inch Sets the print position from the top edge of the paper. Appendix: the printer menu > 108
  • Oki C9650dn | Network and Configuration Guide - Page 109
    Sets the edit direction of paper supported by A3 printer to landscape. Colour setup ITEM the printer. The function is valid only for jobs using PS languages. Sets toner layer purpose such as specification in CMYK colour diminution of PS. Set to OFF to simplify the conversion process of CMYK data
  • Oki C9650dn | Network and Configuration Guide - Page 110
    memory. VALUE DESCRIPTION nn% mm% ll% Initializes the HDD to the factory default state. Sets partition size. Sets the format of a specified partition. Appendix: the printer menu > 110
  • Oki C9650dn | Network and Configuration Guide - Page 111
    VALUE Enable Disable DESCRIPTION Enables the Attention LED to be turned on when a warning for NEAR LIFE of a toner, a drum, a fuser, or a belt occurs. Change password ITEM New password Verify password the current menu settings. Changes the menu settings saved. Appendix: the printer menu > 111
  • Oki C9650dn | Network and Configuration Guide - Page 112
    and reflected in TRC compensation. OFF: the printer does not carry out density adjustment automatically. Prevents dirty print backgrounds caused by unstable tonercharging conditions. The print density sensor detects the toner electric potentials and automatically adjusts supply voltage (SB
  • Oki C9650dn | Network and Configuration Guide - Page 113
    - +1 +2 +3 -3 -2 -1 Allows you to print a pattern to help you adjust TRC manually. (Normally, TRC is automatically adjusted to the recommended levels through density adjustment and TRC compensation.) Adjusts highlight the Adjust Density or Tuning functions. Appendix: the printer menu > 113
  • Oki C9650dn | Network and Configuration Guide - Page 114
    DESCRIPTION Enter password. The default password is 0000 (four zeroes). When there is no support for the print statistics function, Print Statistics is not displayed. Enables/Disables the print the Print Statistics menu. Input the new password again to confirm. Appendix: the printer menu > 114
  • Oki C9650dn | Network and Configuration Guide - Page 115
    MENU To access the Boot Menu: 1. Turn the printer off. 2. Press and hold the ENTER key while turning the printer back on. NOTE Keep pressing the Enter button until INITIALISING when the reception buffer is full or a service call occurs. This menu is not displayed on a Non-PS machine. Appendix: the
  • Oki C9650dn | Network and Configuration Guide - Page 116
    state even when you press the Off-line operating panel switch. The interface sends the BUSY signal only when the reception buffer is full or a service call occurs. This menu is not displayed on a Non-PS machine. Enables/Disables the USB serial number, used to identify a USB device to which a PC
  • Oki C9650dn | Network and Configuration Guide - Page 117
    in the printer. - The encrypted hard disk function is enabled. STORAGE SETUP ITEM Check File System VALUE Execute Check All Sectors Execute DESCRIPTION Resolves any mismatch between actual memory and displayed memory available in a file system and performs administration data (FAT information
  • Oki C9650dn | Network and Configuration Guide - Page 118
    operating normally. Appears only when an HDD has been installed in the printer. This function erases all data from the disk so that the data cannot be restored. Exiting the menu after a setting is made restarts the printer, starting erasing the disk. The percent progress of the erasing is displayed
  • Oki C9650dn | Network and Configuration Guide - Page 119
    POWER SETUP ITEM Peak Power Control VALUE Normal Low Power Save Moisture Control Enable Disable On Off DESCRIPTION The fuser of the printer has two lamps. When the lamps turn on, the printer's power draw increases dramatically. Normal: Both lamps light at the same time. When this happens, the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119