Oki GL408e GL408e/GL412e User's Guide - Page 102

MENU Ignore Text Disable* Power on IGP/PGL Enable* Ext Execute Copy Disable* AI 00 Spaces Disable* Select SO Char 14* Ignore Mode Disable* Select Char 0* Do FF at TOF Enable* Unit 4: Printer Configuration PGL EMULATION MODE (TABLE 4-10) DESCRIPTION Allows selection of whether the printer will ignore unformatted text. Example: With a simple text field using a recognizable printer, the printer can either print this unformatted text or ignore it. • Disable - factory default. Text in normal mode will be printed. Attributes to be printed depend on the PGL Normal menu setting. • Enable - any line of text (non-PGL commands) in normal mode will be ignored. Allows setting the IGP/PGL feature so that it is enabled or disabled when the printer is powered on. • Enable - factory default. The IGP/PGL is enabled when the printer is powered on. The PGL feature is initialized in the Normal mode. • Disable - PGL is disabled when the printer is powered on. The PGL feature is initialized to the Quite mode. Ext Execute copy • Disable - factory default. Dynamic data, overlay data, etc., are not allowed if the optional Form Count parameter (number of forms printed) is specified as part of the Execute command. This setting is IGP-100 compatible. • Enable - dynamic data, overlay data, etc., are allowed within a form where the Form Count parameter is specified in the Execute command. In this case, the same form is printed for whatever is the Form Count. Incremental data is not incremented since the printing page is the same. The overlay data is only printed with the first form and not on subsequent forms, and each form is printed on a separate page. This option is designated for EAN/UCC-128 barcodes whose application idenitfier (AI) is 00. • Disable - factory default. The printable data field is printed with the AI enclosed in parenthesis. • Enable - the printable data field is printed with the UCC fields separated by spaces. This option is IGP-X00 compatible. Select Shift Out Character. Allows to specify a decimal code from 0 throgh 255 to be used in place of Shift Out as the control code which allows access for the alternate set of control function characters. The allowable range is 0 to 255, and the default is 14. This parameter instructs the IGP to ignore the character selected under the Select Character menu. • Disable - factory default. The IGP does not ignore any characters. • Enable - the IGP ignores the character specified in the Select Character menu. Select Character. This parameter selects which character to discard when Ignore mode is enabled. The allowable range is 0 to 255 (in decimal), and the default is 0. Determines whether the printer, with media already set at the top-of-form position, will advance media to the next top-of-form position upon receipt of an FF command. • Enable - factory default. The printer will advance media from the presnt top-of-form position to the next top-of-form position upon receipt of an FF command. • Disable - The printer will not advance media form the present top-of-form position to the next top-of-form position upon receipt of an FF command. GL408-412e Operator Manual 4-66 PN: 9001163A