Oki GL408e GL408e/GL412e User's Guide - Page 144
Print Head Balance Adjustment, Balance Adjustment
View all Oki GL408e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Unit 6: Maintenance PRINT HEAD BALANCE ADJUSTMENT Print head balance is the equalization of pressure against the platen roller from one end to the opposite. If the print head balance is out of adjustment, the printed image will be darker on one side of the label than the other and the media will be prone to travel in the direction of least resistance. To adjust balance, a scaled dial allows adjustment based on the width of the media used. The setting may be viewed through the dial window of the upper print assembly. The that table follows coorelates paper width with a dial setting. NOTE: Once the balance has been set, the print head pressure must also be set. Refer to the Print Head Pressure chapter of this manual for instructions. NOTE: If a desired setting cannot be achieved through the dial alone, loosen the set set screw, adjust the plate, retighten the set screw, and then readjust the dial. BALANCE ADJUSTMENT Paper Width (millimeters) Dial Setting 25 to 55 1 2 55 to 85 3 80 to 110 4 5 Balance Dial Set Screw Upper Print Assy Dial Window Figure 6-5, Print Head Balance Adjustment GL408-412e Operator Manual 6-7 PN: 9001163A