Oki ML620 Pull Tractor Installation Instructions: ML620, ML621, ML690, ML691 - Page 1
Oki ML620 Manual
View all Oki ML620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Push Tractor Installation Instructions: ML620, ML621, ML690, ML691 Pull Tractor 1 Tracteur ou le propulseur 3 Mecanismo de tracción de arrastre 5 Tracionador de puxar 7 Use the pull tractor to efficiently feed multi‑part forms, labels, etc., in a straight path through the bottom of the printer. Prepare the Printer 1. Turn the printer OFF. 2. Open the access cover (Fig. 1) and center the printhead. CAUTION! The printhead may be hot! NOTE: The grooves on the back side of the Pull Tractor (as described in the following step number 2; one on the far left; one on the far right; Fig. 2) attach to the same two pins as the Pull-up Roller Assembly. Install the Tractor 1. Remove the Pull-up Roller Assembly (Fig. 1). Rotate the assembly towards the back of the printer and pull it up off the left and right side pins to remove it. Store the assembly for future use. 2. Install the Pull Tractor. Find the grooves (Fig. 2) on the back side of the tractor (the front side of the tractor has the sprocket pins and tractor covers). With the front side of the tractor facing the front of the printer, use your fingers to help guide the grooves (Fig. 3) onto the pins on the printer, and push the tractor down until it clicks into place. Figure 1 USBDUPSVPROUJOULQLLVLM-MEURP" ASSEMBLY Figure 3 Figure 2 BAIL ARM TRACTOR GROOVES (ON BACK SIDE OF TRACTOR) ACCESS COVER PAPER GUIDE TRACTOR PINS and TRACTOR COVER (SLIDES WHEN NOT LOCKED) LOCK LEVER 1 / English PULL TRACTOR