Olympus C 4000 C-4000 Zoom Basic Manual (1.1 MB) - Page 13

Inserting/Removing the memory card SmartMedia, Power on/off

Get Olympus C 4000 - CAMEDIA Zoom Digital Camera PDF manuals and user guides View all Olympus C 4000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Inserting/Removing the memory card (SmartMedia) En This camera uses SmartMedia card to record pictures. This manual uses the term "card" when referring to SmartMedia. Be sure to use a 3 V (3.3 V) card. Non-Olympus 3 V (3.3 V) cards must be formatted with the camera. Do not use a 5 V card or a 2 MB card. 1 Make sure the camera is turned off (i.e. the mode dial is set to OFF). Open the card cover. 2 Ⅵ Inserting the card Card cover Mode dial Insert the card fully with the contact area facing towards the monitor side. Insert until you feel it locked into place. ● Hold the card in a straight orientation to the card slot. Do not attempt to insert the card at an angle. ● Note the orientation of the card. If it is inserted incorrectly, it may become jammed. Ⅵ Removing the card Push in the card lightly to unlock it, then pull it out. 3 Close the card cover securely until it clicks. Power on/off 1 Before turning the camera on, press the tabs on the lens cap to remove it. 2 Set the mode dial to P, A/S/M/ , or . ● The camera turns on. ● The lens moves out when the mode dial is not set to . 3 Set the mode dial to OFF. ● The power turns off. Mode dial Lens cap 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
13
En
Inserting/Removing the memory card (SmartMedia)
This camera uses SmartMedia card to record pictures. This manual uses the
term “card” when referring to SmartMedia.
Be sure to use a 3 V (3.3 V) card. Non-Olympus 3 V (3.3 V) cards must be
formatted with the camera. Do not use a 5 V card or a 2 MB card.
1
Make sure the camera is turned off (i.e. the
mode dial is set to OFF). Open the card cover.
2
³
Inserting the card
Insert the card fully with the contact area facing
towards the monitor side. Insert until you feel it
locked into place.
●
Hold the card in a straight orientation to the card
slot. Do not attempt to insert the card at an
angle.
●
Note the orientation of the card. If it is inserted
incorrectly, it may become jammed.
³
Removing the card
Push in the card lightly to unlock it, then pull it
out.
3
Close the card cover securely until it clicks.
Mode dial
Card cover
Power on/off
1
Before turning the camera on, press
the tabs on the lens cap to remove it.
2
Set the mode dial to P, A/S/M/
,
or
.
●
The camera turns on.
●
The lens moves out when the mode dial
is not set to
.
3
Set the mode dial to OFF.
●
The power turns off.
Lens cap
Mode dial