Olympus C-750 C-750 Ultra Zoom Reference Manual - English (8.7 MB) - Page 26

Getting started Power on/off Startup/Shutdown screen You can register a picture that will be displayed on the monitor and sound that will be played when turning the camera on or off. (P.157) You can also adjust the volume of the sound. (P.156) 1 Startup/Shutdown screen (Factory default setting) If the card is not recognized (card check) When the power is turned on, the camera checks the card automatically. If there is no card in the camera or a card that is not supported by this camera is inserted, the following screen is displayed. • All data stored on the card is erased when the card is formatted. Note Monitor indication q NO CARD CARD%SEtUP POWER%OFF SELECt FORMAt GO FORMAt CAUtION ERASING%ALL YES NO SELECt GO Corrective action There is no card in the camera or the card is not inserted properly. → Insert a card. If a card is already inserted, remove it and insert it again correctly. The card cannot record, play back or erase pictures. Format the card or replace it with a new one. → Press ac to select POWER OFF, then press e. Replace the card with a new one. → Format the card. Press ac to select I FORMAT, then press e to display the confirmation screen. Select YES and press e. Formatting starts. If the card was successfully formatted, the camera is ready to take pictures. 25