Olympus DS-150 DS-150 Operation Manual (English) - Page 15

ALARMS This recorder is preset to automatically generate the following alarms. You can cancel any alarm with a simple setting operation. 1. Record end alarm Sound: Beep, long beep,...beep, long beep.... Condition: Sounds when the recorder runs out of remaining memory during recording. 2. Record pre-end alarm Sound: Long beep every 15 seconds. Condition: Sounds when the remaining memory drops below 90 seconds during recording. 3. Message end alarm Sound: Low-pitched beep. Condition: Sounds when the end or beginning of a message is reached. 4. Operation alarm Sound: Beep Condition: Sounds when the press of the REC button is accepted. tWhen the earphone is plugged in, the built-in speaker does not generate alarms. (Alarm setting change procedure) ᕃ In the Stop mode, press and hold the MENU switch for more than 2 seconds to display the alarm setting menu ([ALARM] and [ON] or [OFF]) appears on the LCD panel. ᕄ Pressing the MENU switch within 4 seconds allows you to switch the alarm setting between[ON] and [OFF]. The selected alarm setting is set when the STOP button is pressed or when no operation is performed for 4 seconds while the desired alarm setting is displayed. 28 MENU OPERATION When the MENU switch is pressed (for less than 2 seconds), the LCD panel displays the first menu. (In the first menu the LCD panel initially displays [R-TIME] and [SP] or [LP] as described in "1. Recording mode".) Using the Up/Down control on the MENU switch allows you to change the settings of "2 Microphone Sensitivity", "3. VCVA setting", "4. Insert recording mode", "5. Partial erasure", "6. Moving messages between folders" and "7. ERASE ALL" as described below. When the MENU switch is kept pressed (for more than 2 seconds), the LCD panel displays the second menu. (In the second menu the LCD panel initially displays "1. Alarm setting (ON/OFF)".) Adjusting the Up/Down control and pushing the MENU switch allows you to change the settings of "2. Time/date setting", "3. ID number setting" and "4. Formatting" as described below. First menu Stop mode More than 2 seconds R-TIME *Flow in Down direction M-SENS VCVA R-MODE Stop mode More than 2 seconds R-TIME *Flow in Up direction ERASE ALL MOVE Second menu ERASE ERASE R-MODE MOVE VCVA ERASE ALL M-SENS Stop mode More than 2 seconds ALARM *Flow in Down direction FORMAT I D Time/date Stop mode More than 2 seconds ALARM *Flow in Up direction Time/date I D FORMAT * When the STOP button is pressed either in the first or second menu, the recorder will return to the Stop mode. Menu switch operation Down direction operation Up direction operation Push operation 29