Olympus E-10 E-10 Instructions (English) - Page 171
Switching the card
UPC - 050332131354
View all Olympus E-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
3 B 4 5 To the USB port of the computer OFF ON A 6 1 If you are using an IBM compatible PC/AT without Windows 2000 installed, you must first install the USB driver. For more details about how to install the USB driver, refer to the instructions that you received with the CAMEDIA Master. 2 Select the memory card that holds the images you want to read with the computer. (© 121) Note that you cannot change the card selection once the camera is connected the computer. If you wish to change the card selection, you must first disconnect the USB cable. (© 171) 3 Open the connector cover on the camera. 4 Connect the B connector of the USB cable (the large connector) to the camera connection point. 5 Connect the A connector of the USB cable (the flat connector) to 12 the computer. Note • If your computer has two USB ports, you can use either port. 6 Set the mode dial to connection mode). (setup/ Note • The computer recognizes the card selected in the camera as an external disk drive. Normally, the device is displayed as a "Removable Disk". The images on the card can be handled as files with Windows Explorer. While copying or moving image files, never disconnect the USB cable from the camera or computer. Switching the card After changing the card inserted in the camera, make sure that the drive that names the card displays the correct information. To confirm that the display is correct, in Windows Explorer from the View menu select Refresh. 169