Olympus E-10 E-10 Instructions (English) - Page 186

Appendix 4: Troubleshooting (continued) The monitor and viewfinder displays are different. Problem Did you press the monitor button ? Solution Press the monitor button the monitor. to switch on Is the mode dial set for playback , print Set the mode dial to P, A, S, or M. reserve mode , or setup/connection mode ? Did you put the camera in playback mode by pressing the monitor button twice? In the playback mode, the played back image is displayed for viewing. Press the monitor button to restore the camera to the shooting mode. Something other than lines displayed in the See "Cannot operate the camera, monitor and control panel? Cannot operate the camera? control panel blank." Page © 37 © 70 © 46 © 182 Cannot play back images on the monitor. Problem "NO CARD" is displayed in the monitor? "NO PICTURE" is displayed in the monitor? Solution No card is installed in the camera. Insert a card. There are no pictures stored on the card. Make sure that a card that contains images is inserted, or take a picture. Mode dial set to playback ? Or with mode dial set to P, A, S, or M, did you rapidly press the monitor button twice? Set the mode dial to playback , or after setting the mode dial to P, A, S, or M rapidly press the monitor button twice. Something other than lines displayed in the See "Cannot operate the camera, monitor and control panel? Cannot operate the camera? control panel blank." Page © 30 © 189 © 46 © 182 184