Olympus E-500 EVOLT E-500 Basic Manual (English, Español, Fran - Page 16
set to OFF., Make sure the power switch is - lens
UPC - 050332299405
View all Olympus E-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Lens basics 4 Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the camera's body. Rotate the lens clockwise until you hear it click. Lens attachment mark (Red) Alignment mark (Red) En Lens cap 5 Remove the lens cap. Removing the lens from the camera 1 Make sure the power switch is set to OFF. 2 While pressing the lens release button, remove the lens from the camera by rotating it counterclockwise. Lens release button 16
16
Lens basics
En
4
Align the lens attachment mark (red) on
the camera with the alignment mark
(red) on the lens, then insert the lens
into the camera’s body. Rotate the lens
clockwise until you hear it click.
5
Remove the lens cap.
Removing the lens from the camera
1
Make sure the power switch is
set to OFF.
2
While pressing the lens release
button, remove the lens from
the camera by rotating it
counterclockwise.
Lens cap
Alignment mark (Red)
Lens attachment mark (Red)
Lens release button