Olympus IR 500 IR-500 Dock and Done 2.0 Supplement (English) - Page 21

Using the remote control for playback Operating the camera Operating the camera You can use the remote control to play back images on the camera monitor or TV screen. The same operations (such as selecting or deleting images, etc.) can be performed in the same manner as the camera buttons. When using the remote control, set the camera on the cradle. 1 Connect the AC adapter to the cradle, and set the camera on the cradle. Set the camera with the multi-swing display raised and the remote control window facing forwards. Turn the camera connector dial of the cradle to this mark. Power lamp/ Remote control lamp Remote control window 2 Make sure that the camera is turned on. • The mode selection screen appears. • If the camera is turned off, press the power switch on the camera or POWER button on the remote control. • If the storage unit is connected, the "QDOCK MODE" screen appears. Select "EXIT," then press SELECT MODE STORAGE REPLAY ALBUM CALENDAR SELECT GO 9 to exit the screen. 3 Press the a or c button on the remote control to select the desired mode. STORAGE: Displays the data on a Dock&Done-compatible storage unit. REPLAY: Displays the images on the camera. ALBUM: Displays the images on the camera in the album display mode. CALENDAR: Displays the images on the camera in the calendar display mode. CLOCK: Displays the clock. 21