Olympus Stylus 720 SW Stylus 720 SW Advanced Manual (English) - Page 58

The date and time have not been set The camera has been used in the same conditions from the time of purchase • No date and time have been set for the camera at the time of purchase. Set the date and time before using the camera. g "X Setting the date and time" (P. 34) The battery has been pulled out of the camera. • The date and time settings will be returned to the factory default settings if the camera is left without batteries for approximately 1 day. Before taking important pictures, check that the date and time settings are correct. Shooting tips Focusing on the subject There are several ways to focus, depending on the subject. When the subject is not in the center of the frame • Place the subject in the center of the frame, lock the focus on the subject, and then recompose your picture. • Set [AF MODE] to [iESP]. 5 g "AF MODE Changing the focusing area" (P. 21) The subject is moving quickly • Focus the camera on a point roughly the same distance away as the subject you want to shoot (by pressing the shutter button halfway), and then recompose your picture and wait for the subject to enter the frame. Getting to know your camera better Subjects that are difficult to focus on • Under certain types of conditions, it is difficult to focus using auto focus. The green lamp on the monitor lights, allowing you to check if the focus is locked. The green lamp blinks. The subject cannot be brought into focus. The green lamp lights, but the subject cannot be brought into focus. Subject with low contrast Subject with an extremely bright area in the center of the frame Subjects at different distances Fast-moving subject Subject without vertical lines The subject is not in the center of the frame In these cases, focus (focus lock) on an object with high contrast at the same distance as the intended subject, recompose your shot and then take the picture. If the subject has no vertical lines, hold the camera vertically and focus the camera using the focus lock function by pressing the shutter button halfway, and then return the camera to the horizontal position while keeping 58 the button pressed halfway and take the picture.