Onkyo DP-S1 Owners Manual - Basic/Advanced - Page 55

> Before Start > Part Names > Initial Setup > Playback USB Output Advanced Setup | Supplementary Information | Others 1 2 Library Online OTG Cable Line Out Balanced You can connect a headphone amplifier or D/A converter, for example, that has a USB connector. You will need a USB OTG (OnThe-Go) cable (commercially available) to connect to this unit. Make sure you have the correct type of USB cable for the USB port of the device you are connecting to the OTG cable. If it is a micro USB port, you can use the USB cable included with this unit. This unit is compatible with the following devices. (As of December 2017) Headphone amplifier : XPA-700, DACHA300 0 If the attached USB-DAC does not support DoP stream, playback and attached devices may be adversely affected. Connecting a device 1. Connect this unit to the device you are connecting using an OTG cable, etc. Make sure you plug the cable in the right way up when connecting. You may 20 damage the plug or jack if you try to insert it the wrong way. 2. Turn on the power of this unit and the connected device. " " is displayed on the status bar on the screen when this unit recognizes the connected device. 0 When playing DSD format music files, DoP format can be output via USB (P22).