Onkyo DP-S1 Owners Manual - Basic/Advanced - Page 58

> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Operations while Screen Off When set to "Disable", the side keys, such as the Volume dial and the play button (P5), will not work while the LCD of the unit is off. Tap this to change the settings for "Volume" and "Side Buttons". 0 When you slide the hold switch (P5) up to lock operations on this unit, operations are according to the settings in "Operations while Holding". Volume: "Disable" / "Enable (default value)" Side Buttons: "Disable" / "Enable (default value)" ∫ Home You can change the buttons displayed in the home screen to buttons for features you prefer. 0 Change the buttons displayed in the home screen from the home screen. Refer to "Customizing the Home screen" (P26) for how to change. ∫ Power Management Auto Display Off: The unit's LCD automatically switches off when the specified time elapses with no operations. Select "Off", "15 seconds", "30 seconds (default value)", "1 minute", "2 minutes", or "5 minutes". Auto Power Off: The unit's power automatically switches to "Off" when the specified time elapses with no operations. Select "Off (default value)", "10 minutes", "30 minutes", or "60 minutes". Onkyo DapController: This restricts connections between the "Onkyo DapController" smartphone app and this unit. By setting to "Disable", the amount of battery consumed can be reduced even when BLUETOOTH is on. "Enable (default value)": To enable connection with "Onkyo DapController". "Disable": To disable connection with "Onkyo DapController". ∫ Passcode Passcode Lock: Set a four-digit pass code to protect this unit. (This is not set by default) Change Passcode: Change the number for the set pass code. This can not be selected if a pass code has not been set. 0 If you enter the wrong pass code three times, a message appears asking if you want to initialize the unit's settings. Even if the settings are initialized copied music files are not deleted. 0 You should create a pass code to protect your account if you are going to use a network service. ∫ Language Select the language you want to use. Flick the list of languages up or down, then tap the language you want to use. English, German, French, Spanish, Italian, Swedish, Russian, Traditional Chinese, Simplified Chinese, Japanese ∫ Software Update Update Notice: Availability of a software update will be notified via network when "Enable" is set. "Disable": Do not notify "Enable (default value)": Notify Update Now: Software can be updated via a network or via a micro SD card. Select "via Network" or "via SD Card". You can not select if there is no software update. ∫ Device Information Software Version: The current software version is displayed. MAC Address: The MAC address of this unit. This value is specific to the component and cannot be changed. Serial Number: The unique identifier for this unit. License: Displays a guide to our privacy policy and the licenses for open source software. Certification: The certificates for acquired safety standards are displayed. ∫ Reset Reset All Settings: The settings of the unit are initialized. Note that music files copied to the internal storage are not deleted. Also, after resetting, the initial settings screen is automatically displayed. Factory Reset: Reset the unit to the condition it was in when you purchased it. Note that music files copied to the internal storage and settings data are all deleted. En 23