Onkyo HT-S9800THX Owners Manual - English/Spanish/French - Page 22
Multi-zone
View all Onkyo HT-S9800THX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
> Before Start > Part Names > Install > Initial Setup > Playback Multi-zone 1 2 3 same setting. To return the remote controller to main room control mode: While holding down MODE on the remote controller, press MAIN (c) for 3 seconds or more until the remote indicator flashes once. a Basic Operations Audio, it will automatically switch to the play the same source in the main b You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). 0 DSD and Dolby TrueHD audio signals are not output to ZONE 2 when selected with the "NET" input selector. 0 You can only select the same inputs for the main room and separate room with the "NET" or "BLUETOOTH" input Direct listening mode. (European models) Perform the following procedure when the unit is on. 1. While holding down MODE (e) on the remote controller, press ZONE 2 (d) for 3 or more seconds until the remote indicator blinks twice. 0 The remote controller switches to the mode for controlling ZONE 2. 2. Point the remote controller at the main room and separate room, press ZONE 2 on the main unit twice. 4. Volume adjustment is done on the premain amplifier for the separate room when connected via ZONE 2 LINE OUT. When outputting from ZONE speakers, adjust with volume buttons on the remote controller. 0 To control on the main unit, press ZONE 2 and adjust with the MASTER VOLUME control within 8 seconds. selector. If you have "NET" selected in the main room and then select unit and press Í (a). "Z2" lights on the main unit display. To turn off the function: Press Í while in the mode for controlling c "BLUETOOTH" in the separate room, the main room also switches to ZONE 2 on the remote controller. Alternatively press OFF on the main unit. d "BLUETOOTH". You cannot select different stations for the main room and Playing in ZONE 2 only: e separate room with the AM/FM radio. 3. Press the input selector button (b) of the If you turn the unit to standby during multi- 0 If ZONE 2 is on, power consumption during standby becomes larger than input to be played in the separate room. 0 On the main unit, after pressing ZONE zone playback, the Z2 indicator is dimmed and the playback mode is switched to normal. 2, within 8 seconds press the input playback in a separate room only. Setting 0 If ZONE 2 is turned on when the listening mode of the main room is Pure selector button to select the input to be played in the separate room. To ZONE 2 to on while this unit is in standby will also switch the playback mode to the 22