Onkyo TX-NR1007 Owner Manual

Onkyo TX-NR1007 Manual

Get Onkyo TX-NR1007 PDF manuals and user guides View all Onkyo TX-NR1007 manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo TX-NR1007 manual content summary:

  • Onkyo TX-NR1007 | Owner Manual - Page 1
    AV Receiver TX-NR1007 Instruction Manual Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new
  • Onkyo TX-NR1007 | Owner Manual - Page 2
    USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. accordance with the manufacturer's instructions. 8. Do not install Batteries Always consider the environmental issues and follow local regulations when edge of the shelf or board above the apparatus shall be set 10
  • Onkyo TX-NR1007 | Owner Manual - Page 3
    sound pressure it checked by your Onkyo dealer. 8. Handling Part 15 instructions receiving antenna. • Increase the separation between the equipment and receiver. • Connect CANADA. Sur les modèles dont la fiche est polarisée: ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
  • Onkyo TX-NR1007 | Owner Manual - Page 4
    adapter if your AC outlet does not match with the plug on the AV receiver's power cord (adapter varies from country to country). *How to mount the AC plug: FRONT HIGH RIGHT FRONT HIGH RIGHT FRONT HIGH RIGHT FRONT HIGH RIGHT SURROUND BACK LEFT SURROUND BACK LEFT SURROUND BACK LEFT SURROUND BACK
  • Onkyo TX-NR1007 | Owner Manual - Page 5
    14 Controlling the AV Receiver 15 About Home Theater 17 Enjoying Home Theater 17 Connection Connecting the AV receiver 18 Connecting Your Speakers 18 Bi-amping the Front Speakers 21 Connecting Antenna 22 About AV Connections 24 Connecting Components with HDMI 25 Connecting Both Audio
  • Onkyo TX-NR1007 | Owner Manual - Page 6
    Watts/Channel @ 6 ohms (JEITA) • WRAT-Wide Range Amplifier Technology (5 Hz-100 kHz bandwidth) • Linear Optimum Gain Volume Circuitry • 3-Step Inverted Darlington Circuitry • H.C.P.S. (High Current Power Supply) Massive High Power Transformer Processing • THX Ultra2 Plus*1 Certified • HDMI Video
  • Onkyo TX-NR1007 | Owner Manual - Page 7
    To receive HD Radio broadcasts, you must install an Onkyo UP-HT1 HD Radio tuner module (sold separately). *7. In Europe, using banana plugs to connect speakers digital and analog domains. THX Ultra2 Plus receivers also feature proprietary THX technologies (e.g., THX Mode) which accurately translate
  • Onkyo TX-NR1007 | Owner Manual - Page 8
    control (62) and indicator This control is used to adjust the volume of the AV receiver to -2 dB, -81.5 dB through +18.0 dB (relative display). The volume level can also be displayed as an absolute value. See "Volume Setup" on page 105. K PURE AUDIO button and indicator (76) Selects the Pure Audio
  • Onkyo TX-NR1007 | Owner Manual - Page 9
    Front & Rear Panels-Continued (North American models) L M N O P Q RS T U VW X Y Z[ (European and Asian models) " R The page numbers in parentheses show where you can find the main explanation for each item. L PHONES jack (65) This 1/4-inch phone jack is for connecting the volume level Manual
  • Onkyo TX-NR1007 | Owner Manual - Page 10
    Front & Rear Panels-Continued X SETUP MIC jack (57) Audyssey MultEQ® XT Room Correction and Speaker Setup microphone connects here. Y AUX INPUT (37) This input can be used to connect a camcorder, game console, and so on. There are jacks for composite video, analog audio, and optical digital audio.
  • Onkyo TX-NR1007 | Owner Manual - Page 11
    the audio source: HDMI, ANALOG, or DIGITAL. M Volume level (62) Displays the volume level. N MUTING indicator (64) Flashes while the AV receiver is muted. BCD E F GH IJ K L M N O P QRS T UVWX Y Z [ " #* * North American models B UNIVERSAL PORT This port is for connecting the component with the
  • Onkyo TX-NR1007 | Owner Manual - Page 12
    on another Onkyo AV component. The AV receiver's remote controller can then be used to control that component. To use V, you must make an analog audio connection (RCA) between the AV receiver and the other AV component, even if they are connected digitally. H RS232 Terminal for control. I HDMI IN
  • Onkyo TX-NR1007 | Owner Manual - Page 13
    , or an MPEG decoder. Z PRE OUT: FRONT L/R, CENTER, SURR L/R, SURR BACK L/R, and FRONT HIGH/WIDE L/R These multichannel analog audio outputs can be connected to the analog audio input on a multichannel power amplifier for when you want to use the AV receiver solely as a preamplifier. PRE OUT: SW1
  • Onkyo TX-NR1007 | Owner Manual - Page 14
    an Onkyo component without V connection, point the remote controller at the other component to use it. • When you want to operate an Onkyo component with V connection or an -compatible compo- nent connected via HDMI (pages 136 and 137), point the remote controller at the AV receiver's remote
  • Onkyo TX-NR1007 | Owner Manual - Page 15
    Turns on the AV receiver. D ACTIVITIES buttons (66, 146) Used with the MACRO function. E REMOTE MODE/INPUT SELECTOR buttons (62, 136 to 142) Selects the remote controller modes and the input sources. F SP LAYOUT button (65) This button is used to change the speaker selection: Front High speakers or
  • Onkyo TX-NR1007 | Owner Manual - Page 16
    Remote Controller-Continued ■ Controlling the tuner To control the AV receiver's tuner, press the [TUNER] (or [RECEIVER]) button. You can select AM or FM by pressing select a preset directly. Note: An Onkyo cassette recorder connected via V can also be controlled in Receiver mode (see page 142). 16
  • Onkyo TX-NR1007 | Owner Manual - Page 17
    TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo's original DSP listening modes. You can also enjoy THX Surround EX (THX-certified THX speaker system recommended). Front left and right speakers These output the overall sound. Their role in a home theater is to provide a solid anchor for
  • Onkyo TX-NR1007 | Owner Manual - Page 18
    bass. To get the best from your surround sound system, you need to set the speaker settings. You can do this automatically (see page 56) or manually (see page 90). Note: Front high and front wide speakers produce no sound at the same time. Attaching the Speaker Labels The AV receiver's positive
  • Onkyo TX-NR1007 | Owner Manual - Page 19
    of the two surround speakers to the SURR L/R terminals. Do not connect them to the SURR BACK/ZONE 3 L/R, FRONT WIDE/ZONE 2 L/R, or FRONT HIGH L/R terminals. • Be careful not to short the positive and negative wires. Doing so may damage the AV receiver. • Make sure the metal core of the wire does not
  • Onkyo TX-NR1007 | Owner Manual - Page 20
    Connecting the AV receiver-Continued Connecting the Speaker Cables 1 Strip 1/2" to 5/8" (12 to 15 mm) speaker, connect it to the SURR BACK/ZONE 3 L terminal. Front high right speaker Front wide right speaker Front right speaker Front left speaker Front wide left speaker Front high left
  • Onkyo TX-NR1007 | Owner Manual - Page 21
    the jumper bars that link the Speakers' tweeter (high) and woofer (low) terminals. • Bi-amping can only be used with speakers that support bi-amping. Refer to your speaker manual. Bi-amping Speaker Hookup 1 Connect the AV receiver's FRONT R positive (+) terminal to the right speaker's positive
  • Onkyo TX-NR1007 | Owner Manual - Page 22
    connect commercially available outdoor FM and AM antennas. The AV receiver won't pick up any radio signals without any antenna connected, so you must connect the AM antenna to achieve the best possible reception. Keep the antenna as far away as possible from your AV receiver, TV, speaker cables, and
  • Onkyo TX-NR1007 | Owner Manual - Page 23
    and other high-voltage equipment. problems. If circumstances demand it, use a TV/FM antenna splitter, as shown. Outdoor AM antennas work best connected. Outdoor antenna must be grounded in accordance with local regulations to prevent electrical shock hazards. TV/FM antenna splitter To AV receiver
  • Onkyo TX-NR1007 | Owner Manual - Page 24
    analog audio cable (RCA) The AV receiver does not support SCART plugs. 24 Jack HDMI V OPTICAL L R Description HDMI connections can carry uncompressed standard- or high-definition digital video and audio and offer the best picture and sound quality. Component video separates the luminance
  • Onkyo TX-NR1007 | Owner Manual - Page 25
    does not support HDMI OUT SUB. Use HDMI OUT MAIN instead. About Copyright Protection The AV receiver supports HDCP (High-bandwidth Digital Content Protection)*2, a copy-protection system for digital video signals. Other devices connected to the AV receiver via HDMI must also support HDCP. *1 DVI
  • Onkyo TX-NR1007 | Owner Manual - Page 26
    down the AV receiver's volume. • The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there's no sound from a component connected via HDMI, check its setup. Refer to the connected component's instruction manual for
  • Onkyo TX-NR1007 | Owner Manual - Page 27
    supported by your other components. Use the following sections as a guide. Video Connection Formats Video equipment can be connected to the AV receiver by using any one of the following video connection formats: composite video, S-Video, component video, or HDMI, the latter offering the best
  • Onkyo TX-NR1007 | Owner Manual - Page 28
    outputs. Use the "Both", "Both IN (Main)" or "Both (Sub)" setting if you connect the AV receiver's HDMI OUT MAIN and HDMI OUT SUB to your TVs. AV receiver The composite video, S-Video, and component video outputs pass through their respective input MONITOR OUT signals as they are. Composite
  • Onkyo TX-NR1007 | Owner Manual - Page 29
    TAPE OUT. DVD/BD player, etc. Audio Signal Flow Chart Analog Multichannel Optical Coaxial AV receiver Analog HDMI HDMI *1 TV, projector, etc. *1 Depends on the "Audio TV Out" setting (see page 108). *2 Only the front L/R channels are output. If signals are present at more than one input, the
  • Onkyo TX-NR1007 | Owner Manual - Page 30
    Connecting the AV receiver-Continued Connecting a TV or Projector See "Connecting Components with HDMI" on page 25 for HDMI connection information. Step 1: Video Connection Choose a video connection that matches your TV ( A , B , or C ), and then make the connection. Step 2: Audio Connection
  • Onkyo TX-NR1007 | Owner Manual - Page 31
    the AV receiver-Continued Connecting a DVD Player See "Connecting Components with HDMI" on page 25 for HDMI connection information. Step 1: Video Connection Choose a video connection that matches your DVD player ( A , B , or C ), and then make the connection. You must connect the AV receiver to
  • Onkyo TX-NR1007 | Owner Manual - Page 32
    supports multichannel audio formats such as DVD-Audio and Super Audio CD, and it has a multichannel analog audio output, you can connect it to the AV receiver's multichannel input. Use a multichannel analog audio cable, or several normal audio cables, to connect the AV receiver's MULTI CH: FRONT
  • Onkyo TX-NR1007 | Owner Manual - Page 33
    to the VCR or DVD recorder in Zone 2 or Zone 3. • To enjoy Dolby Digital and DTS, use connection b or c . (To listen in Zone 2 or Zone 3 as well, use a and b , or a and c .) Connection A B C a b c . AV receiver COMPONENT VIDEO IN 2 (CBL/SAT) VCR/DVR IN S VCR/DVR IN V VCR/DVR IN L/R DIGITAL COAXIAL
  • Onkyo TX-NR1007 | Owner Manual - Page 34
    VCR to the recording VCR without going through the AV receiver, connect the TV/VCR's audio and video outputs directly to the recording VCR's audio and video inputs. See the manuals supplied with your TV and VCR for details. • Video signals connected to composite video inputs can only be recorded via
  • Onkyo TX-NR1007 | Owner Manual - Page 35
    the video source or listen in Zone 2 or Zone 3. • To enjoy Dolby Digital and DTS, use connection b or c . (To record or listen in Zone 2 or Zone 3 as well, use a and b , or a and c .) Connection A B C a b c AV receiver COMPONENT VIDEO IN 2 (CBL/SAT) CBL/SAT IN S CBL/SAT IN V CBL/SAT IN L/R DIGITAL
  • Onkyo TX-NR1007 | Owner Manual - Page 36
    your game console or listen in Zone 2 or Zone 3. • To enjoy Dolby Digital and DTS, use connection b . (To record or listen in Zone 2 or Zone 3 as well, use a and b .) Connection A B C a b AV receiver COMPONENT VIDEO IN 3 (GAME) GAME IN S GAME IN V GAME IN L/R DIGITAL OPTICAL IN 1 (GAME) Signal
  • Onkyo TX-NR1007 | Owner Manual - Page 37
    Connecting the AV receiver-Continued Connecting a Camcorder or Other Device Step 1: Video Connection Make the connection A . Step 2: Audio Connection Choose an audio connection that matches your camcorder ( a or b ), and then make the connection. Connection A a b AV receiver AUX INPUT VIDEO AUX
  • Onkyo TX-NR1007 | Owner Manual - Page 38
    available MC head amp or MC transformer. Connect your turntable to the head amp or transformer, and connect that to the AV receiver's PHONO IN L/R jacks. • You can also use a phono equalizer to connect a turntable with an MC-type cartridge. See your phono equalizer's manual for details. AUDIO
  • Onkyo TX-NR1007 | Owner Manual - Page 39
    a , you can play and record or listen in Zone 2 or Zone 3. • To connect the recorder digitally for playback, use connections a and b , or a and c . Connection a b c AV receiver TV/TAPE IN L/R TV/TAPE OUT L/R DIGITAL COAXIAL IN 3 (CBL/SAT) DIGITAL OPTICAL IN 1 (GAME) Signal flow Cassette
  • Onkyo TX-NR1007 | Owner Manual - Page 40
    and use the AV receiver as a preamp, connect it to the PRE OUT jacks, and connect all speakers and the subwoofer to the power amplifier. You can connect the powered subwoofer with each jacks respectively. If you use one subwoofer, connect it to PRE OUT: SW1. Power amplifier 123456789 1. Front left
  • Onkyo TX-NR1007 | Owner Manual - Page 41
    RI Dock, see the RI Dock's instruction manual. ■ If Your iPod Supports Video: Connect your RI Dock's audio output jacks to the AV receiver's GAME IN or VCR/DVR IN L/R jacks, and connect its video output jack to the AV receiver's GAME IN V or VCR/DVR IN V jack. (Onkyo DSA2 hookup shown below.) ■ If
  • Onkyo TX-NR1007 | Owner Manual - Page 42
    either one to the AV receiver. The other jack is for connecting additional V-capable components. • Connect only Onkyo components to V jacks. Connecting other manufacturer's components may cause a malfunction. • Some components may not support all V functions. Refer to the manuals supplied with your
  • Onkyo TX-NR1007 | Owner Manual - Page 43
    turn on any components connected via V. To turn the AV receiver off, press the [ON/STANDBY] button, or press the remote controller's [STANDBY] button. The AV receiver will enter Standby mode. To prevent any loud surprises when you turn on the AV receiver, always turn down the volume before you turn
  • Onkyo TX-NR1007 | Owner Manual - Page 44
    that you need to make before using the AV receiver for the very first time. Monitor Setup ■ Change "Monitor Out" setting manually If you connect your TV to HDMI OUT MAIN, "Monitor Out" setting is automatically set so that the onscreen setup menus are displayed and composite video, SVideo, and
  • Onkyo TX-NR1007 | Owner Manual - Page 45
    can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and 2 Use the Up and Down [R]/[X] but- [ENTER] button. tons to select "6. Miscella- neous", and then press [ENTER]. The "Miscellaneous" menu appears. 6. Miscellaneous 1. Volume Setup 2. OSD Setup 45
  • Onkyo TX-NR1007 | Owner Manual - Page 46
    to return to the previous menu. Using the Display to change the settings The settings of the AV receiver can be changed using the Display. 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu item appears on the display. 2 Use the Up and Down [R]/[X] but- tons to
  • Onkyo TX-NR1007 | Owner Manual - Page 47
    specify the output resolution for the HDMI outputs and COMPONENT VIDEO MONITOR OUT and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV. 1 Press the [RECEIVER] button, followed by the [SETUP] button. The main menu appears onscreen
  • Onkyo TX-NR1007 | Owner Manual - Page 48
    AV receiver at the same resolution and with no conversion. Auto* : Select this to have the AV receiver automatically convert video at resolutions not supported Press the [SETUP] button. The setup menu closes. • This procedure can also be performed on the AV receiver by using its [SETUP] button,
  • Onkyo TX-NR1007 | Owner Manual - Page 49
    that input to an input selector. For example, if you connect your DVD/BD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD/BD input selector. If you've connected your TV to the AV receiver with an HDMI cable, you can set the AV receiver so that composite video, S-Video, and component video
  • Onkyo TX-NR1007 | Owner Manual - Page 50
    Fixed If you've connected your TV to the AV receiver with a component video cable, you can set the AV receiver so that composite video and /Output Assign" menu appears. 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input 4. Digital Audio Input 5. Analog Audio Input
  • Onkyo TX-NR1007 | Owner Manual - Page 51
    in "HDMI Input Setup" on page 49, the AV receiver will select audio from HDMI IN as a priority. • Press the [ENTER] button when you do not use the signal of audio from the HDMI IN. The "* " mark is displayed like "COAX1* ". • "AUX" is used only for digital input from the front panel terminals
  • Onkyo TX-NR1007 | Owner Manual - Page 52
    on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 2 Use the Up and Down [R]/[X] but- tons to select "1. Input/Output Assign", and then press [ENTER]. The "Input/Output Assign" menu appears. 1. Input/Output Assign 1. Monitor Out 2. HDMI
  • Onkyo TX-NR1007 | Owner Manual - Page 53
    hookup information, see "Bi-amping the Front Speakers" on page 21. Notes: • When bi-amping is used, the AV receiver is able to drive up to 7.2 speakers in the main room. • Before you change these settings, turn down the volume. 1 Press the [RECEIVER] button, followed by the [SETUP] button. The
  • Onkyo TX-NR1007 | Owner Manual - Page 54
    Volume Setup 2. OSD Setup 5 When you've finished, press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP English 7. Hardware Setup 1. Remote ID 2. Multi Zone 3. Tuner 4. HDMI 5. Network 6. Firmware Update 4 Use the
  • Onkyo TX-NR1007 | Owner Manual - Page 55
    used in your area. 5 Press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Changing the Input Display If you connect an V-capable Onkyo MiniDisc recorder, CD recorder, or RI
  • Onkyo TX-NR1007 | Owner Manual - Page 56
    connect and position all of your speakers. If Audyssey Dynamic EQ is set to "On", Audyssey Dynamic Volume™ becomes available. About Audyssey Dynamic EQ Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume one that best matches yours, and position the microphone accordingly
  • Onkyo TX-NR1007 | Owner Manual - Page 57
    the TV, select the input to which the AV receiver is connected. Set the speaker setup microphone at the Main Listening Position B (page 56), and connect it to the SETUP MIC jack. The speaker setting menu appears. MultEQ XT: Auto Setup Speakers Type(Front) Powered Zone2 Powered Zone3 Normal Not Act
  • Onkyo TX-NR1007 | Owner Manual - Page 58
    measurement disruptions (even if the cell phone is not in use). 4 Press [ENTER]. The room correction and speaker setup starts. MultEQ XT: Auto Setup Do not unplug setup microphone. Please keep quiet. Now measuring. . . Test tones are played through each speaker as Audyssey MultEQ® XT Room
  • Onkyo TX-NR1007 | Owner Manual - Page 59
    Setup -- Review SP Configuration -- Subwoofer No Front Full Band Center 40Hz Surround 120Hz Front Wide Full Band Front High following screen appears. MultEQ XT: Auto Setup Saving... 11 Disconnect the speaker setup microphone. MultEQ XT: Auto Setup set to "Audyssey" and "Dynamic EQ
  • Onkyo TX-NR1007 | Owner Manual - Page 60
    SL : --FWL : Yes FHL : Yes SBL : --C : Yes FR : --SR : --FWR : --FHR : No SBR : --SW1 : --SW2 : --- Retry Cancel One of the front high speakers has not been detected. MultEQ XT: Auto Setup Speaker Detect Error FL : Yes SL : No FWL : Yes FHL : Yes SBL : Yes C : Yes FR : Yes SR : Yes FWR : Yes
  • Onkyo TX-NR1007 | Owner Manual - Page 61
    Correction and Speaker Setup again. Note that if the volume is set too high and the sound distorts, detection issues may occur, so use an appropriate volume level. If the subwoofer has a lowpass filter switch, set it to Off or Direct. Refer to your subwoofer's instruction manual for details. Retry
  • Onkyo TX-NR1007 | Owner Manual - Page 62
    AV component that you want to listen to or watch). MASTER VOLUME INPUT SELECTOR RECEIVER VOL R/X Input selector buttons 1 AV receiver Remote controller or Use the AV receiver need to select the video input that's connected to the AV receiver's HDMI outputs, COMPONENT VIDEO MONITOR OUT or
  • Onkyo TX-NR1007 | Owner Manual - Page 63
    for each speaker or subwoofer. 2 AV receiver Use the Up [S] and Down [F] buttons to adjust. Tip: This procedure can also be performed on the remote controller by using [AUDIO] button (see page 112). ■ Bass You can boost or cut low-frequency sounds output by the front speakers from -10 dB to +10
  • Onkyo TX-NR1007 | Owner Manual - Page 64
    the sleep time is being displayed, you'll shorten the sleep time by 10 minutes. To unmute the AV receiver, press the [MUTING] button again, or adjust the volume. The Mute function is cancelled when the AV receiver is set to Standby. Tip: You can specify how much the output is muted with the "Muting
  • Onkyo TX-NR1007 | Owner Manual - Page 65
    back and front high speakers, or surround back and front wide speakers. Using Headphones You can connect a pair of stereo headphones (1/4-inch phone plug) to the AV receiver's PHONES jack for private listening, as shown. Notes: • Always turn down the volume before connecting your headphones
  • Onkyo TX-NR1007 | Owner Manual - Page 66
    or [MY MUSIC] button. MY MOVIE (default): 1. The TV connected to the AV receiver is turned on. 2. The Onkyo DVD player con- nected to the AV receiver is turned on. 3. The AV receiver is turned on. 4. The input selector of the AV receiver is set to "DVD/BD". 5. The player starts playback. *1 MY
  • Onkyo TX-NR1007 | Owner Manual - Page 67
    to start the Onkyo Cassette recorder, while holding down [TV/TAPE] button, press and hold down the [MY MUSIC] button (about 3 seconds) flashes twice. Tip: This procedure can also be performed via onscreen menu (see page 143). Switching Normal Macro Mode You can switch the AV receiver to normal
  • Onkyo TX-NR1007 | Owner Manual - Page 68
    model changes FM/AM frequency in 200k/10k (or 50k/9k) Hz steps. In Manual Tuning mode, FM stations will be in mono. Tuning into weak FM stereo stations , it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono. ■ Tuning into Stations by
  • Onkyo TX-NR1007 | Owner Manual - Page 69
    Listening to the Radio-Continued Presetting AM/FM Stations MEMORY PRESET F/S AV receiver To select a preset, use the PRESET [F]/[S] buttons, or the remote controller's CH [+/-] button. or Remote controller You can store a combination of up to 40 of
  • Onkyo TX-NR1007 | Owner Manual - Page 70
    text information, RDS can also help you find radio stations by type (e.g., news, sport, rock, etc.). The AV receiver supports four types of RDS information: PS (Program Service) When tuned to an RDS station that's broadcasting PS information, the station's name will be displayed. Pressing the
  • Onkyo TX-NR1007 | Owner Manual - Page 71
    " appears. Press the [RT/PTY/TP] button once. The RT information scrolls across the display. Notes: • The message "Waiting" may appear while the AV receiver waits for the RT information. • If the message "No Text Data" appears on the display, no RT information is available. Finding Stations by Type
  • Onkyo TX-NR1007 | Owner Manual - Page 72
    about which iPod models are supported by the UP-A1 Dock, see the UP-A1 Dock instruction manual. Note: Before using the UP-A1 Dock, update your iPod with the latest software, available from the Apple Web site. Function Overview ■ Basic Operation Note: The AV receiver may take several seconds to
  • Onkyo TX-NR1007 | Owner Manual - Page 73
    a Dock with Universal Port connector: • Connect the Dock to the UNIVERSAL PORT jack. • See the Dock's instruction manual for more informa- tion. You can control the AV receiver. I ALBUM +/- button Selects the next or previous album. J VOL [R]/[X] button (62) Adjusts the volume of the AV receiver. K
  • Onkyo TX-NR1007 | Owner Manual - Page 74
    Dock for iPod-Continued Status messages ❏ PORT Reading The AV receiver is checking the connection with the dock. ❏ PORT Not Support The AV receiver do not support the connected dock. ❏ PORT UP-A1 UP-A1 Dock is connected. Notes: • The AV receiver displays the message "UP-A1" for several seconds after
  • Onkyo TX-NR1007 | Owner Manual - Page 75
    a video recorder (e.g., VCR, DVD recorder) connected to the VCR/DVR OUT jack. See pages 27 to 42 for hookup information. 1 Use the input selector buttons to select the source that you want to record. You can watch the source while record- ing. The AV receiver's MASTER VOL- UME control has no
  • Onkyo TX-NR1007 | Owner Manual - Page 76
    be selected if your DVD player is connected to the AV receiver with a digital audio connection (coaxial, optical, or HDMI). • The listening modes you can listening modes intended for use with video games. [THX] button This button selects the THX listening modes. 76 ■ LISTENING MODE buttons [MOVIE
  • Onkyo TX-NR1007 | Owner Manual - Page 77
    the "Speaker Configuration" setting (see page 90)). *2 For 9ch output, output can be switched between the combination of Surround back and Front high, or Surround back and Front wide speakers by pressing the [SP LAYOUT] button. *5 This listening mode is not available while you are using Zone 2 ("Not
  • Onkyo TX-NR1007 | Owner Manual - Page 78
    Digital Music PLII/PLIIx Movie*3 THX Cinema PLII/PLIIx Movie Audyssey DSX*4 PLllz Height THX Cinema Neo:6 Cinema THX Cinema Neo:6 Cinema Audyssey DSX*4 Neural THX Cinema PLII/PLIIx Music*3 THX Music PLII/PLIIx Music Audyssey DSX*4 PLllz Height THX Music Neo:6 Music THX Music Neo:6 Music Audyssey DSX
  • Onkyo TX-NR1007 | Owner Manual - Page 79
    PLII/PLIIx Game*3 THX Games PLII/PLIIx Game Audyssey DSX*4 PLllz Height THX Games Neural THX Games PLII Game Ultra2 Games PLIIz Height Ultra2 Games Orchestra SBL SBR speaker is connected to the AV receiver. b. Either of Front High speakers or Front Wide speakers is connected to the AV receiver. *5
  • Onkyo TX-NR1007 | Owner Manual - Page 80
    Stereo Mono DolbyDigital/ DolbyDigital Plus/TrueHD/ Multichannel/ DTS/ DTS 96/24*6/ DTS Express/ DTS-HD High Resolution Audio/DTS-HD Master Surround Audyssey DSX*4 THX Cinema PLIIx Movie THX Cinema PLIIx Movie Audyssey DSX PLIIz Height THX Cinema Neo:6 THX Cinema Neural Cinema THX Music ✔: Available
  • Onkyo TX-NR1007 | Owner Manual - Page 81
    PLIIx Music Audyssey DSX PLIIz Height THX Music Neo:6 THX Music Neural THX Music THX Games PLIIx Height THX Games Neo:6 THX Games Neural THX Games Surround EX Ultra2 Cinema PLIIz Ultra2 Cinema Ultra2 Music PLIIz Ultra2 Music Ultra2 Games PLIIz Ultra2 Games Orchestra Unplugged Studio-Mix TV Logic
  • Onkyo TX-NR1007 | Owner Manual - Page 82
    a better sound according to the player. In that case, set the output setting on the player side to PCM. *4 This listening mode can be selected only when all the following conditions are satisfied: a. Center speaker is connected to the AV receiver. b. Either of Front High speakers or Front Wide
  • Onkyo TX-NR1007 | Owner Manual - Page 83
    Stereo Mono Multichannel/ DolbyDigital Plus/TrueHD/ DTS-HD High Resolution Audio/DTS-HD Master Audio/ DTS-ES Discrete*6/ DTS-ES Matrix*6 PLIIz Height Audyssey DSX*4 THX Cinema PLIIz Height THX Cinema THX Music PLIIz Height THX Music THX Game PLIIz Height THX Games Orchestra Unplugged Studio-Mix
  • Onkyo TX-NR1007 | Owner Manual - Page 84
    speakers will output the sound. *4 This listening mode can be selected only when all the following conditions are satisfied: a. Center speaker is connected to the AV receiver. b. Either of Front High speakers or Front Wide speakers is connected to the AV receiver. *5 This listening mode is
  • Onkyo TX-NR1007 | Owner Manual - Page 85
    dimension and provides an enveloping surround sound experience, perfect for rotating and fly-by sound effects. Dolby Digital Plus . DTS-HD High Resolution Audio Developed specifically designed to enhance the playback of compressed digital music content. It provides listeners with an expanded sound
  • Onkyo TX-NR1007 | Owner Manual - Page 86
    Loudness Plus is configured for game audio levels, with Timbre Matching active. • THX Ultra2 Cinema This mode expands 5.1-channel sources for 7.1channel playback. It does this by analyzing the composition of the surround source, optimizing the ambient and directional sounds to produce the surround
  • Onkyo TX-NR1007 | Owner Manual - Page 87
    5. Listening Mode Preset 6. Miscellaneous 7. Hardware Setup 8. Remote Controller Setup 9. Lock Setup pages 105-106 6. Miscellaneous 1. Volume Setup 2. OSD Setup pages 106-110 7. Hardware Setup 1. Remote ID 2. Multi Zone 3. Tuner 4. HDMI 5. Network 6. Firmware Update page 128 1. Input/Output Assign
  • Onkyo TX-NR1007 | Owner Manual - Page 88
    5 When you've finished, press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] blue contrast. "-50" is the least. "+50" is the greatest. HDMI Input See "HDMI Input Setup" on page 49. 88
  • Onkyo TX-NR1007 | Owner Manual - Page 89
    subwoofer output at 15 dB higher than normal. With this setting, you can change the AV receiver's subwoofer sensitivity to match your DVD player. Note that this setting only affects signals connected to the AV receiver's MULTI CH: SUBWOOFER jack. If you find that your subwoofer is too loud, try the
  • Onkyo TX-NR1007 | Owner Manual - Page 90
    them manually, which is useful if you change one of the connected speakers after using Audyssey MultEQ® XT Room Correction and Speaker Setup. Note: The Speaker Setup cannot be carried out while headphones are connected to the AV receiver. 1 Press the [RECEIVER] button followed by the [SETUP] button
  • Onkyo TX-NR1007 | Owner Manual - Page 91
    Setup (see page 56). With the Double Bass function, you can boost bass output by feeding bass sounds from the front left and right, center channels to the subwoofer. * If you're using THX-certified speakers, select "Off(THX 127), or "Speakers Type(Front)" setting is set to "Bi-Amp" (page 53), this
  • Onkyo TX-NR1007 | Owner Manual - Page 92
    ). Notes: • The speakers cannot be calibrated while the output of the AV receiver is muted. • The test tone is output at the standard level for THX, which is 0 dB (absolute volume setting 82). If you normally listen at volume settings below this, be careful because the test tone will be much louder
  • Onkyo TX-NR1007 | Owner Manual - Page 93
    effect. Equalizer Manual: You can adjust the equalizer for each speaker manually. If you selected "Manual", continue volume at each frequency can be adjusted from -6 to +6 dB in 1 dB steps. Tip: Low frequencies (e.g., 63Hz) affect bass sounds; high frequencies (e.g., 16000Hz) affect treble sounds
  • Onkyo TX-NR1007 | Owner Manual - Page 94
    technology featured in THX Ultra2 Plus™ and THX Select2 Plus™ Certified receivers. With THX Loudness Plus, home theater audiences can now experience the rich details in a surround mix at any volume level. A consequence of turning the volume below Reference Level is that certain sound elements can be
  • Onkyo TX-NR1007 | Owner Manual - Page 95
    sound and listening modes as you like. 1 Press the [RECEIVER] button followed by the [SETUP SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP : Mono audio is output by the front left and right speakers. This setting determines
  • Onkyo TX-NR1007 | Owner Manual - Page 96
    if no surround back speaker is connected. This setting is effective with Dolby Digital, Dolby Digital Plus and Dolby TrueHD only. Note: If the "Front High" and "Front Wide" settings are set to other than "None" (page 90), this setting is fixed at "Manual". DTS Neo:6 Music Center Image 0 to
  • Onkyo TX-NR1007 | Owner Manual - Page 97
    and Speaker Setup. Dynamic EQ Off: Audyssey Dynamic EQ™ off (default). On: Audyssey Dynamic EQ™ on. With Audyssey Dynamic EQ™, you can enjoy great sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased
  • Onkyo TX-NR1007 | Owner Manual - Page 98
    Setup front Front left speaker left and right speakers relative to the listening position. Front Plus sources. *2 Sets the level of the LFE channel for DTS and DTS-HD High Resolution sources. *3 Sets the level of the LFE channel for multichannel PCM sources. (Multichannel PCM is input via HDMI
  • Onkyo TX-NR1007 | Owner Manual - Page 99
    SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its input selector buttons, [SETUP you may find that the picture and sound are out of sync. With the If HDMI Lip Sync is enabled (see page 108), and your TV or display supports HDMI Lip
  • Onkyo TX-NR1007 | Owner Manual - Page 100
    Advanced Setup-Continued Name Edit You can enter a custom name for each individual input to "Blue Contrast") can also be set using the [VIDEO] button on the remote controller. 1. Press the [RECEIVER] button, followed by the [VIDEO] button. 2. Use the Up and Down [R]/[X] buttons to select item, and
  • Onkyo TX-NR1007 | Owner Manual - Page 101
    "On", the "Zoom Mode" is fixed at "Full". Normal: Full: (default) Zoom: Wide Zoom: Auto: According to the input signals and monitor output setting, the AV receiver automatically selects the Normal, Full, or Zoom mode. For the monitor output setting, see "Monitor Out Setup" on page 47. 101
  • Onkyo TX-NR1007 | Owner Manual - Page 102
    to obtain optimal picture quality from the receiver. Accordingly, Onkyo recommends that setup and calibration be performed by an the output resolution for the HDMI outputs and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV. Available
  • Onkyo TX-NR1007 | Owner Manual - Page 103
    Advanced Setup-Continued Brightness*1 -50 to +50 (default: 0) With this setting you can adjust the picture brightness. "-50" is the darkest. "+50" is the brightest. Contrast*1 -50
  • Onkyo TX-NR1007 | Owner Manual - Page 104
    also be performed on the AV receiver by using its [SETUP] button, arrow buttons, when a Dolby Digital or Dolby Digital Plus format digital audio signal is played used when a DTS or DTS-HD High Resolution format digital audio signal is multichannel PCM sources input via a HDMI IN, such as DVD-Audio.
  • Onkyo TX-NR1007 | Owner Manual - Page 105
    are explained below. 5 When you've finished, press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Volume Setup Volume Display Absolute: Display range is "Min", 0.5 through 99
  • Onkyo TX-NR1007 | Owner Manual - Page 106
    AV receiver function is adjusted. Even when "On" is selected, operation details may not be output if the input source is connected to an HDMI Setup", and then press [ENTER]. The "Hardware Setup" menu appears. 7. Hardware Setup 1. Remote ID 2. Multi Zone 3. Tuner 4. HDMI 5. Network 6. Firmware Update
  • Onkyo TX-NR1007 | Owner Manual - Page 107
    models) See "FM/AM Frequency Step Setup" on page 54. SAT Radio Mode (North American models) If you connect a SIRIUS Satellite Radio antenna to the AV receiver (sold separately), set this setting to "SIRIUS". See the separate Satellite Radio Guide for more information. Antenna Aiming (North American
  • Onkyo TX-NR1007 | Owner Manual - Page 108
    your HDMI source and HDMI-compatible TV both support the "x.v.Color", you can enable "x.v.Color" on the AV receiver with this setting. Notes: • If the color is unnatural when "x.v.Color" is set to "Enable", change the setting to "Disable". • Refer to the connected component's instruction manual for
  • Onkyo TX-NR1007 | Owner Manual - Page 109
    of whether the AV receiver is On or on Standby, both audio and video received by an HDMI input will be output from the HDMI output for playback on the TV or other component that's connected to the HDMI output. • Refer to the connected component's instruction manual for details. TV Control
  • Onkyo TX-NR1007 | Owner Manual - Page 110
    of the versions of the AV receiver and Onkyo dock (if connected). Receiver via NET: You can update the firmware via Internet. Check the network connection before update. You can update the AV receiver's firmware. Do not shutdown the power of the AV receiver while update. Universal Port via NET
  • Onkyo TX-NR1007 | Owner Manual - Page 111
    page 51). Normally, the AV receiver detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS: • If the beginnings of tracks from a PCM source are cut off, try setting the
  • Onkyo TX-NR1007 | Owner Manual - Page 112
    in 2 dB steps (default: 0 dB) You can boost or cut high-frequency sounds output by the speakers. Notes: • To bypass the bass and treble tone circuits, select the Direct, Pure Audio or THX listening mode. • This procedure can also be performed on the AV receiver by using its [TONE], Down[F] and Up
  • Onkyo TX-NR1007 | Owner Manual - Page 113
    listening modes: THX Cinema, THX Surround EX, and THX Ultra2 Cinema. Note: Settings for the Re-EQ function are kept in each listening mode. However, in THX listening mode, when the AV receiver is turned off, it will return to "On". Audyssey Dynamic Volume™ Dynamic Volume See "Dynamic Volume" of
  • Onkyo TX-NR1007 | Owner Manual - Page 114
    Setup-Continued Speaker Levels You can adjust the volume of each speaker while listening to an input source. These temporary adjustments are cancelled when the AV receiver is set to Standby. To save the setting you made here, go to "Level Calibration" on page 92 before setting the AV receiver
  • Onkyo TX-NR1007 | Owner Manual - Page 115
    . Network Requirements ■ Ethernet Network The AV receiver's Ethernet port supports 10Base-T. For best results, a 100Base-TX switched Ethernet network is recommended. Although it's possible to play music on a computer that's connected to the network wirelessly, playback may be unreliable, so wired
  • Onkyo TX-NR1007 | Owner Manual - Page 116
    time. To enhance your Internet radio experience, the http://onkyo.vtuner.com/ portal is available to you as an connection. • Services available may vary depend- ing on the region. See the separate instructions for more information. On your computer, start your Web browser and enter the AV receiver
  • Onkyo TX-NR1007 | Owner Manual - Page 117
    lights up. Notes: • When it flashes, confirm the network connection. • To update the screen, press the [RETURN] button. 3 Use the Up support this function. • Depending on the sharing settings in the media server, the AV receiver may not able to access the content. Refer to the instruction manual
  • Onkyo TX-NR1007 | Owner Manual - Page 118
    [RANDOM] button again. Random playback supports up to 20000 songs per folder. AV receiver connections. Windows Media Player 11 Setup This section explains how to configure Windows Media Player 11 so that the AV receiver click OK. 4 Select the AV receiver in the list, and then click Allow. 5 Click
  • Onkyo TX-NR1007 | Owner Manual - Page 119
    Audio File Formats For server playback, the AV receiver supports the following music file formats: MP3, WMA, 05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, and 96 kHz are supported. Incompatible files cannot be played. • Quantization bit: 8 bit, 16 bit, 24 bit • Number of channels: 2
  • Onkyo TX-NR1007 | Owner Manual - Page 120
    NET-Continued Server Requirements The AV receiver can play digital music files stored on a computer or media server and supports the following technologies: • Windows Media Player 11 • Windows Media Connect 2.0 • DLNA-certified media server If the operating system of your computer is Windows Vista
  • Onkyo TX-NR1007 | Owner Manual - Page 121
    Save". This section explains how to configure the AV receiver's network settings manually. If your router's DHCP server is enabled Setup", and then press [ENTER]. The "Hardware Setup" menu appears. 7. Hardware Setup 1. Remote ID 7 2. Multi Zone 3. Tuner 4. HDMI 5. Network 6. Firmware Update
  • Onkyo TX-NR1007 | Owner Manual - Page 122
    's MAC (Media Access Control) address. This address cannot be changed. DHCP This setting determines whether or not the AV receiver uses DHCP to automatically configure its IP Address, Subnet Mask, Gateway, and DNS Server settings. Enable: DHCP enabled. Disable: DHCP disabled. If you select "Disable
  • Onkyo TX-NR1007 | Owner Manual - Page 123
    AV receiver-a surround-sound such as Dolby, DTS, and THX (see pages 76 to 86). * Front high left and right speakers While Powered Zone 2 is being used, nothing is output by these speakers (page 124). Front left and right speakers Front wide left and right speakers When the speaker is connected
  • Onkyo TX-NR1007 | Owner Manual - Page 124
    to "Act" (see page 127). Hookup • Connect your Zone 2 speakers to the AV receiver's FRONT WIDE/ZONE 2 L/R speaker terminals. Main room AV receiver TV AV receiver Zone 2 R Zone 2 IN R L Receiver/ integrated amp Note: With the default settings, the Zone 2 volume must be set on the Zone
  • Onkyo TX-NR1007 | Owner Manual - Page 125
    Zone 2 TV. Main room TV AV receiver Zone 2 TV Note: The ZONE 2 OUT V jack outputs video from components connected to composite video only. Zone 2 12V Trigger When Zone 2 is turned on, the output from the 12V TRIGGER OUT ZONE 2 goes high (+12 volts, 150 milliamperes max). Connecting this jack to a 12
  • Onkyo TX-NR1007 | Owner Manual - Page 126
    terminals. Main room TV AV receiver Zone 3 R L Notes: • With this setup, the Zone 3 volume is controlled by the AV receiver. • Powered Zone3 cannot be used if "Speakers Type(Front)" is set to "Bi-Amp" (see page 53). AV receiver Zone 3 IN R L Receiver/ integrated amp Note: With the default
  • Onkyo TX-NR1007 | Owner Manual - Page 127
    The "Speaker Setup" menu appears. Type(Front)" is set to "Bi-Amp" (see page 53). • This procedure can also be performed on the AV 2. Speaker Setup 1. Speaker Settings 2. Speaker Configuration 3. Speaker Distance 4. Level Calibration 5. Equalizer Settings 6. THX Audio Setup receiver by using its
  • Onkyo TX-NR1007 | Owner Manual - Page 128
    closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. ■ Zone2/3 Out If you've connected your Zone 2/3 speakers to an amp with no volume control, set the "Zone2 Out" and "Zone3 Out" setting, respectively, to "Variable
  • Onkyo TX-NR1007 | Owner Manual - Page 129
    for Zone 2/3, and how to adjust the volume for Zone 2/3. Controlling Zone 2/3 from the AV receiver ZONE 3 indicator ZONE 2 indicator Controlling Zone , the ZONE 2/3 indicator lights up. Tip: The 12V TRIGGER OUT ZONE 2/3 goes high (+12 V). To select AM or FM press the [TUNER] input selector and the
  • Onkyo TX-NR1007 | Owner Manual - Page 130
    that require front high or front wide speakers such as Dolby Pro Logic IIz Height or Audyssey Dynamic Surround Expansion™ are unavailable. • When you connect Zone 3 speakers directly to the AV receiver, listening modes that require surround back speakers such as Dolby EX, DTS-ES or THX Ultra2 Cinema
  • Onkyo TX-NR1007 | Owner Manual - Page 131
    controller Using a Multiroom Kit with Other Components In this setup, an IR emitter is connected to the AV receiver's IR OUT jack and placed in front of the other component's remote control sensor. Infrared signals received at the AV receiver's IR IN jack are fed through to the other component
  • Onkyo TX-NR1007 | Owner Manual - Page 132
    CD player (page 140) Onkyo cassette recorder with V (page 142) Looking up for Remote Control Code You can look up for appropriate remote control code from onscreen setup menu. Note: This setting can be carried out by using Onscreen Setup Menu only. 1 Press the [RECEIVER] button fol- lowed by
  • Onkyo TX-NR1007 | Owner Manual - Page 133
    's remote control sensor, as shown below. Transmitter Incoming sensor 15 AV receiver 15 15° off center (Left/Right/Up/Down) Approx. 16ft. (5 m) On the remote controller press the [ENTER] button. 8-1. Remote Mode Setup Category Brand TV TV XXXXX Wait When the transfer is successful, the
  • Onkyo TX-NR1007 | Owner Manual - Page 134
    Notes: • Remote control codes cannot be entered for the [RECEIVER] and [ZONE] buttons. • Only TV remote control codes can be entered for the [TV MODE button that corresponds with the input to which you connect your component. For example, if you connect your CD player to the CD input, choose the [
  • Onkyo TX-NR1007 | Owner Manual - Page 135
    for Onkyo Components Connected via V Onkyo components that are connected via V are controlled by pointing the remote controller at the AV receiver, code. 1 While holding down the REMOTE MODE button that you want to reset, press and hold down the [AUDIO] button until the REMOTE MODE button
  • Onkyo TX-NR1007 | Owner Manual - Page 136
    button is preprogrammed with the remote con- trol code for controlling a TV that supports the *1 (limited to some models). The TV must be able to receive remote control commands via and be connected to the AV receiver via HDMI. If con- trolling your TV via doesn't work very well, program your
  • Onkyo TX-NR1007 | Owner Manual - Page 137
    [DVD/BD] button is preprogrammed with the remote control code for controlling an Onkyo DVD player. For details on entering a remote control code for a differ- that supports the *1. The component must be able to receive remote control commands via and be connected to the AV receiver via HDMI.
  • Onkyo TX-NR1007 | Owner Manual - Page 138
    . K DISPLAY button Displays information. L MUTING button (64) Mutes or unmutes the AV receiver. M CH +/- button Selects TV channels on the video recorder. N VOL [R]/[X] button (62) Adjusts the volume of the AV receiver. O PREV CH button Selects the previous channel. P RETURN button Exits the menu
  • Onkyo TX-NR1007 | Owner Manual - Page 139
    GUIDE button Displays the onscreen program guide. D Arrow [R]/[X]/[F]/[S] and ENTER buttons Used to navigate menus and select items. E SETUP button Displays the setup the AV receiver. J CH +/- button Selects satellite/cable channels. K VOL [R]/[X] button (62) Adjusts the volume of the AV receiver. L
  • Onkyo TX-NR1007 | Owner Manual - Page 140
    ENTER buttons Used to navigate menus and select items. D SETUP button Used to access the Onkyo CD player's settings. E buttons Play, Pause, Stop, or unmutes the AV receiver. K DISC +/- button Selects discs on a CD changer. L VOL [R]/[X] button (62) Adjusts the volume of the AV receiver. M RANDOM
  • Onkyo TX-NR1007 | Owner Manual - Page 141
    a remote control code 81993 (with V). • Connect the RI Dock to the TV/TAPE IN, VCR/DVR IN, or GAME IN L/R jacks. • Set the RI Dock's RI MODE switch to HDD or HDD/ DOCK. • Set the AV receiver's Input Display to DOCK (see page 55). • See to the Dock's instruction manual for more information. Press the
  • Onkyo TX-NR1007 | Owner Manual - Page 142
    . G MUTING button (64) Mutes or unmutes the AV receiver. H VOL [R]/[X] button (62) Adjusts the volume of the AV receiver. I Stop [] button Stops playback. Notes: • An Onkyo cassette recorder connected via V can also be controlled in Receiver mode. • With some components, certain buttons may not
  • Onkyo TX-NR1007 | Owner Manual - Page 143
    [RECEIVER] button fol- lowed by the [SETUP] AV receiver to turn on "Enable". Disable: AV receiver to turn on "Disable". This option enables the AV receiver to turn on when the ACTIVITIES button is pressed. Receiver Source Change Enable: AV receiver input selector is change. Disable: AV receiver
  • Onkyo TX-NR1007 | Owner Manual - Page 144
    's remote control sensor, as shown below. Transmitter Incoming sensor 15 AV receiver 15 15° off center (Left/Right/Up/Down) Approx. 16ft. (5 m) On the remote controller press the [ENTER] button. 8-2. Activities Setup My Movie Wait When the transfer is successful, the following screen
  • Onkyo TX-NR1007 | Owner Manual - Page 145
    Commands The AV receiver's remote Pause, and so on are preprogrammed with commands for controlling Onkyo CD players, cassette decks, and DVD players. However, they the preprogrammed commands at any time by resetting the remote controller (see page 135). • To overwrite a previously learned command
  • Onkyo TX-NR1007 | Owner Manual - Page 146
    MUSIC] button. The commands in the macro are transmitted in the order in which they were programmed. Keep the remote controller pointed at the AV receiver until all of the commands have been transmitted. Macros can be run at any time, regardless of the current remote controller mode. Deleting Macros
  • Onkyo TX-NR1007 | Owner Manual - Page 147
    Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can't resolve the issue yourself, contact your Onkyo dealer. If you can't resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo dealer. To reset the AV
  • Onkyo TX-NR1007 | Owner Manual - Page 148
    connected to an analog input. • Powered Zone 3 cannot be used if "Speakers Type(Front)" is set to "Bi-Amp" (page 53). There's no sound with a certain signal format • Check the digital audio output setting on the con- nected device. On some game consoles, such as those that support the AV receiver
  • Onkyo TX-NR1007 | Owner Manual - Page 149
    by the HDMI outputs. • If the message "Resolution Error" appears on the AV receiver's display, this indicates that your TV does not support the current video resolution and you need to select another resolution on your DVD player. The onscreen menus don't appear • If your TV is connected to the
  • Onkyo TX-NR1007 | Owner Manual - Page 150
    those that contain several instructions. Dock for iPod There's no sound • Make sure your iPod is actually playing. • Make sure your iPod is inserted properly in the Dock. • Make sure the UP-A1 Dock is connected to the UNI- VERSAL PORT jack on the AV receiver. • Make sure the AV receiver is turned on
  • Onkyo TX-NR1007 | Owner Manual - Page 151
    the same IP address to the AV receiver, so if you find that you can't connect to a server or Internet radio station, recheck the AV receiver's IP address on Network screen. • Check the Network settings (page 121). Others The sound changes when I connect my headphones • When a pair of headphones
  • Onkyo TX-NR1007 | Owner Manual - Page 152
    Troubleshooting-Continued The following settings can be made for the SVideo, composite video and COMPONENT VIDEO inputs You must use the buttons on the AV receiver to make these settings. 1. While holding down the input selector button for the input source that you want to set, press the [SETUP]
  • Onkyo TX-NR1007 | Owner Manual - Page 153
    Specifications Amplifier Section Rated Output Power All channels: North American: 135 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.05% (FTC) 145 watts (Front) ■ Video Outputs HDMI Component
  • Onkyo TX-NR1007 | Owner Manual - Page 154
    signals at different resolutions are output by the AV receiver. NTSC ✔: Output Output Input 1080p 1080i HDMI 720p 480p 480i 1080p 1080i COMPONENT 720p 480p 480i S-VIDEO 480i COMPOSITE 480i 1080p ✔ ✔ ✔ 1080i HDMI 720p 480p ✔ ✔ COMPONENT 480i 1080p 1080i 720p
  • Onkyo TX-NR1007 | Owner Manual - Page 155
    Memo 155
  • Onkyo TX-NR1007 | Owner Manual - Page 156
    Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS GmbH
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
E
n
AV Receiver
TX-NR1007
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction
...................................
2
Connection
..................................
18
Turning On & First Time Setup
.....
43
Basic Operations
.........................
62
Using the Listening Modes
........
76
Advanced Setup
..........................
87
NET
............................................
115
Multi Zone
................................
123
Controlling Other Components
....
132
Others
.........................................
147