Onkyo TX-NR1007 Owner Manual - Page 28
Monitor Out Setting Set to Both, Both Main or Both Sub
View all Onkyo TX-NR1007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Connecting the AV receiver-Continued ■ "Monitor Out" Setting Set to "Both", "Both (Main)" or "Both (Sub)" With the "Monitor Out" setting set to "Both", DVD/BD player, etc. Video Signal Flow Chart "Both (Main)" or "Both (Sub)" (see page 47), video input signals flow through the AV receiver as shown, with composite video, S-Video, and component video sources all being upconverted Composite S-Video Component HDMI for both HDMI outputs. Use the "Both", "Both IN (Main)" or "Both (Sub)" setting if you connect the AV receiver's HDMI OUT MAIN and HDMI OUT SUB to your TVs. AV receiver The composite video, S-Video, and component video outputs pass through their respective input MONITOR OUT signals as they are. Composite S-Video Component HDMI Both: Video signals are output from both HDMI outputs at the resolution supported by both TVs. You cannot select "Resolution" setting. The "Picture Adjust" setting will be that for "HDMI Main". TV, projector, etc. Both (Main): Video signals are output from both HDMI outputs but HDMI OUT MAIN will become a priority; depending on the resolution, video signals may not be output from HDMI OUT SUB. Both (Sub): Video signals are output from both HDMI outputs but HDMI OUT SUB will become a priority; depending on the resolution, video signals may not be output from HDMI OUT MAIN. Note: The "Monitor Out" setting will be automatically switched to "Analog" (see page 47) if not connected to both outputs when "Both" is selected or if not connected to a priority output when "Both (Main)" or "Both (Sub)" is selected. ■ "Monitor Out" Setting Set to "Analog" With the "Monitor Out" setting set to "Analog" DVD/BD player, etc. (see page 47), video input signals flow through Video Signal Flow Chart the AV receiver as shown, with composite video and S-Video sources being upconverted for the component video output. Use this setting if you Composite S-Video Component HDMI connect the AV receiver's COMPONENT VIDEO MONITOR OUT to your TV. IN Composite video is upconverted to S-Video and S-Video is downconverted to composite video. Note that these conversions only apply to the MONITOR OUT V and S outputs, not the VCR/DVR OUT V and S outputs. AV receiver Composite MONITOR OUT S-Video Component HDMI The composite video, S-Video, and component video outputs pass through their respective input signals as they are. This signal flow also applies when the "Resolution" setting is set to "Through" (see page 47). TV, projector, etc. Video Signal Flow and the Resolution Setting DVD/BD player, etc. Video Signal Flow Chart When the "Monitor Out" setting is set to "Ana- log" (see page 47), if the "Resolution" setting is set to anything other than "Through" (see page 47), the video signal flow will be as shown here, with composite video and S-Video sources Composite S-Video Component IN HDMI being upconverted for the component video out- put. AV receiver The composite video, S-Video, and component video outputs pass through their respective analog input signals as they are. HDMI input signals Composite MONITOR OUT S-Video Component HDMI are not output. TV, projector, etc. 28