Onkyo TX-NR1007 Owner Manual - Page 51
Digital Audio Input Setup
View all Onkyo TX-NR1007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
First Time Setup-Continued Digital Audio Input Setup If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN1 jack, you should assign that jack to the CD input selector. By default, the COAXIAL IN1 jack is assigned to the DVD/ BD input selector, although this can be changed. Here are the default assignments. Input selector DVD/BD VCR/DVR CBL/SAT GAME AUX TV/TAPE TUNER CD PHONO PORT Default assignment COAX1 COAX2 COAX3 OPT1 FRONT (Fixed) ----- - - - - - (Fixed) OPT2 --------- 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use the Up and Down [R]/[X] but- tons to select "1. Input/Output Assign", and then press [ENTER]. The "Input/Output Assign" menu appears. 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input 4. Digital Audio Input 5. Analog Audio Input 3 Use the Up and Down [R]/[X] but- tons to select "4. Digital Audio Input", and then press [ENTER]. The "Digital Audio Input" menu appears. 1-4. Digital Audio Input DVD/BD VCR/DVR CBL/SAT GAME AUX COAX1 COAX2 COAX3 OPT1 FRONT 4 Use the Up and Down [R]/[X] but- tons to select an input selector, and use the Left and Right [F]/ [S] buttons to select "COAX1", "COAX2", "COAX3", "OPT1", "OPT2", or analog)". • When an HDMI IN is assigned to an input selector in "HDMI Input Setup" on page 49, the AV receiver will select audio from HDMI IN as a priority. • Press the [ENTER] button when you do not use the signal of audio from the HDMI IN. The "* " mark is displayed like "COAX1* ". • "AUX" is used only for digital input from the front panel terminals. Examples: If you connect your DVD player to the OPTICAL IN 1 jack, set "DVD/BD" to "OPT1". If you want to listen to audio from the component connected to the OPTICAL IN 2 jack when the VCR/DVR input selector is selected, set "VCR/DVR" to "OPT2". If you want to listen to audio from the component connected to the COAXIAL IN 1 jack when the CBL/ SAT input selector is selected, set "CBL/SAT" to "COAX1". For input selectors that you don't want to assign a digital input jack, set to analog)". 5 Press the [SETUP] button. The setup menu closes. Notes: • If you connect an input component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector. • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 51