Onkyo TX-NR6100 7.2-Channel THX Certified AV Receiver Instruction Manual - Eng - Page 116
Audio Adjust, Multiplex/Mono, Dolby
View all Onkyo TX-NR6100 7.2-Channel THX Certified AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
3. Audio Adjust 1. Multiplex/Mono Change the settings of multiplex audio playback. Multiplex Input Channel (Default Value: Main) Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc. • For multiplex audio broadcasts, pressing the button on the remote controller will display "1+1" on the main unit's display. Main Sub Main / Sub Main channel only Sub channel only Main and sub channels will be output at the same time. Mono Input Channel (Default Value: Left + Right) Set the input channel when playing in Mono listening mode digital signals such as Dolby Digital or analog/PCM signals recorded in 2 channels. Left Right Left + Right Left channel only Right channel only Left and right channels Mono Output Speaker (Default Value: Center) Set the speaker to output monaural audio in the Mono listening mode. • If an item cannot be selected even though connection is correct, check that the settings in "2. Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. Center Left / Right Audio is output from the center speaker. Audio is output from the front L/R speakers. Setup 2. Dolby Change the setting of when Dolby signals are input. Loudness Management (Default Value: On) When playing Dolby TrueHD, enable the dialog normalization function which keeps the volume of dialog at a certain level. Note that when this setting is Off, the Late Night function that allows you to enjoy surround at low volumes is fixed to off when playing Dolby Digital Plus/Dolby TrueHD. On When this function is used Off When this function is not used 3. DTS Change the setting of when DTS signals are input. DTS Auto Surround (Default Value: On) When inputting DTS signals that include extended channel information, the optimum listening mode is automatically selected according to the extended information contained in the input signal and the speaker configuration of this unit when playing in the straight decoding listening mode. On When this function is used Off Audio is played using the same amount of channels in the input signal according to the speaker configuration of this unit. • If this function is set to "Off", the ES Matrix and ES Discrete listening modes cannot be selected. Dialog Control (Default Value: 0 dB) You can increase the volume of dialog portion of the audio up to 6 dB by 1 dB step so that you can hear the dialog easily in noisy atmosphere. • This cannot be set for content other than DTS:X. • Depending on the content, this function may not be selected. 116