Onkyo TX-NR6100 7.2-Channel THX Certified AV Receiver Instruction Manual - Eng - Page 63
Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices, Pairing
View all Onkyo TX-NR6100 7.2-Channel THX Certified AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Playback Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices The illustration shows an image. Pairing 1. Press the input selector you want to play. • Select a source other than "BLUETOOTH". This function does not work if you select "BLUETOOTH". • This function can be used in one location, either the main room (where this unit is located) or a separate room (ZONE 2). When using in the main room, set the input selector for the separate room to anything other than "BLUETOOTH". Set the input selector similarly for the main room when using in the separate room. 2. Press the button on the remote controller, select "5. Hardware" "Bluetooth" - "Bluetooth Transmitter", and press the ENTER button. 3. In "Bluetooth Transmitter", select "On". Bluetooth Transmitter Bluetooth Transmitter Search Devices aptX HD Low Latency Mode Pairing Information Device Status Set to "Off" if you are not using the Bluetooth Transmitter. On Start Off Off Clear Ready 4. In "Search Devices", press ENTER. • The search starts for BLUETOOTH wireless technology enabled devices that are able to receive, then a list of relevant devices is displayed. 5. Select the device you want to output the audio from, and when you press ENTER the message "Now Pairing..." is displayed and the two are paired. • Depending on the BLUETOOTH wireless technology enabled device, you may need to pair manually. If the device name does not appear in the list, check the settings of the BLUETOOTH wireless technology enabled device. 63