Onkyo TX-NR676 Owners Manual - Basic/Advanced - Page 20
Multi-zone Connection, Connections with an AV component, ZONE 2 LINE OUT, ZONE SPEAKER, ZONE2
View all Onkyo TX-NR676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. MAIN ROOM b a OR ZONE2 c LINE IN BD/DVD ZONE SPEAKER ZONE2 LINE OUT a Digital coaxial cable, b Analog audio cable, c Speaker cable 20 5. Multi-zone Connection You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). 0 DSD and Dolby TrueHD audio signals are not output to ZONE 2 when selected with the "NET" input selector. Connections with an AV component When outputting the audio of an externally connected AV component to ZONE 2, you need to connect using a digital coaxial cable, digital optical cable, or analog audio cable. ZONE 2 LINE OUT It is possible to play 2 ch source in a separate room while 7.1 ch source is being played in the main room. Connect the ZONE 2 LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier in a separate room with an analog audio cable. ZONE SPEAKER It is possible to connect speakers in a separate room and play 2 ch sources. 0 You cannot use ZONE SPEAKER if you have connected the front speakers using Bi-Amping connection. 0 No sound is played from the surround back speakers or the height speakers when playing audio from ZONE SPEAKER. Setup 0 Settings are required in Initial Setup, "4. Multi Zone Setup" (P23) to enjoy this feature. 0 The audio from externally connected AV components can only be played in ZONE 2 when the audio is analog or 2ch PCM audio. If you have connected to this unit with a digital coaxial cable or digital optical cable, it may be necessary to change the audio output of the AV component to PCM output.