Onkyo TX-NR696 AV Receiver Owners Manual - English - Page 122
Equalizer Settings, THX Audio
View all Onkyo TX-NR696 AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 6. Equalizer Settings You can adjust the output volume of the range for each connected speaker. Adjust the volume of different sound ranges for each speaker. You can set three different equalizers in Preset 1 to 3. The number of frequencies that can be selected for each speaker is up to five bands for the Subwoofer and nine bands for the other speakers. Setting Item Front Center Height Surround Surround Back Subwoofer Default Value 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB Setting Details After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to "Zone 2" and Zone 2 is on. After selecting the speaker frequency between "25 Hz" and "160 Hz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • This cannot be selected if "Configuration" - "Subwoofer" is set to "No". • Depending on the input source or listening mode setting, the desired effect may not be achieved. 7. THX Audio Change the THX Audio settings. Setting Item Back Speaker Spacing Default Value >4.0 ft/>1.2 m THX Ultra / Select No Subwoofer BGC Off Setting Details Select the distance between the surround back speakers from "1.2 m". • The unit of distance (ft/m) is displayed using the unit selected for the "Distance" setting. • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to a selection item other than "No" and Zone 2 is on. • If the item cannot be selected even though connection is correct, check if the setting in "Configuration" - "Speaker Channels" matches the number of connected channels. Set whether a THX-certified subwoofer is connected or not. "Yes": When a THX-certified subwoofer is connected "No": When a THX-certified subwoofer is not connected • The setting cannot be changed if "Configuration" - "Subwoofer" is set to "No" Correct an emphasized bass sound when listening to music near the wall or boundary of the room due to layout limitation of the listening room. The THX Select receivers can adjust the balance of bass sound. "On": When this function is used "Off": When this function is not used • In the following cases, the setting cannot be changed: -- "Configuration" - "Subwoofer" is set to "No". -- "THX Ultra / Select Subwoofer" is set to "No". 122 Front Panel≫ Rear Panel≫ Remote≫