Onkyo TX-NR696 Owners Manual - English - Page 79
Playing Back, MASTER VOLUME dial.
View all Onkyo TX-NR696 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Playing Back Contents ≫ Connections ≫ Playback ≫ Setup ≫ In remote controller operation, while pressing and holding the ZONE 2 SHIFT button, press other buttons for operation. 1. While pressing and holding the ZONE 2 SHIFT button on the remote controller, point the remote controller at this unit and press . • "Z2" on the display of the main unit lights up. 2. While pressing and holding the ZONE 2 SHIFT button on the remote controller, press the input selector of the input source you want to play in the separate room. To control on the main unit, press the ZONE 2 button, and then within 8 seconds, press the input selector button of the input to be played in the separate room. To play the same source in the main room and separate room, press the ZONE 2 button of the main unit twice. 3. When using the ZONE 2 LINE OUT connection, adjust the sound volume on the pre-main amplifier in the separate room. For the ZONE speaker output, while pressing and holding the ZONE 2 SHIFT button on the remote controller, adjust the volume with the volume button. To do this on the main unit, press the ZONE 2 button, and then within 8 seconds, adjust the volume using the MASTER VOLUME dial. • If you turn the unit to standby during multi-zone playback, the Z2 indicator is dimmed, and the playback mode is switched to playback in a separate room only. Setting ZONE 2 to on while the unit is in standby also switches the playback mode to playback in the separate room only. • When audio is being output from the ZONE SPEAKER, surround back speakers or height speakers cannot play audio. (North American and Taiwanese models) • The audio from externally connected AV components can be output to ZONE 2 only when the audio is analog or 2ch PCM signal. When the AV component is connected to this unit with an HDMI cable, digital coaxial cable or digital optical cable, change the audio output of the AV component to the PCM output. • When video and audio via HDMI input are output to ZONE 2, set "1. Input/ Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( p115) to "Use" on the Setup menu. 79 Front Panel≫ Rear Panel≫ Remote≫