Onkyo TX-NR696 Owners Manual - English - Page 81
ZONE B Playback, Playing Back, OnA+B
View all Onkyo TX-NR696 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ ZONE B Playback While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifier, etc. (ZONE B) ( p46) connected to the ZONE B LINE OUT jack at the same time. Playing Back 1. Press the Q button on the remote controller and select "Audio" - "Zone B". • In the following cases, "Zone B" cannot be selected. -- When ZONE 2 is On -- When "2. Speaker" - "Configuration" - "Zone 2 Lineout" on the Setup menu is set to an item other than "Zone B" ( p119) 2. Select the audio output destination. Off: Outputs audio only from ZONE A. "A" on the display of the main unit lights up. On(A+B): Outputs audio from both ZONE A and ZONE B. "A"and "B" on the display of the main unit light up. On(B): Outputs audio only from ZONE B. "B" on the display of the main unit lights up. 3. Start play on the AV component. 4. Adjust the sound volume on the pre-main amplifier, etc. of ZONE B. • When "Zone 2 Lineout" is set to "Zone B", and "Audio" - "Zone B" on the Quick Menu is set to "On (A+B)", the ZONE A output is set as below. -- Sound quality cannot be adjusted. -- "2. Speaker" - "Crossover" - "Double Bass" on the Setup menu ( p120) is fixed to "On". -- The effect for "2. Speaker" - "Distance" on the Setup menu ( p120) is disabled. • If "On(A+B)" is selected as an audio output destination, you can select only the "Stereo" listening mode for ZONE A when using the 2.1ch speaker layout. When using a speaker layout of 3.1ch or more, you can select only the "AllCh Stereo" listening mode. 81 Front Panel≫ Rear Panel≫ Remote≫