Onkyo TX-NR777 Owners Manual -Basic - Page 21
Multi-zone Connection-2 ZONE, SPEAKER
View all Onkyo TX-NR777 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
> Before Start > Part Names > Install > Initial Setup > Playback ZONE 2B (Also act as the SURROUND BACK or HEIGHT jacks) ZONE 2A MAIN ROOM c b a OR ZONE 2 SPEAKER A BD/DVD ZONE 2 SPEAKER B a Digital coaxial cable, b Analog audio cable, c Speaker cable 6. Multi-zone Connection-2 (ZONE SPEAKER) You can enjoy 2ch audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio through the speakers in the separate room (ZONE 2). You can connect up to two speaker systems and output the same audio. To connect one speaker system, use the ZONE 2A jacks, and to connect two speaker systems, use the ZONE 2B jacks in addition to the ZONE 2A jacks. When connecting two speaker systems, all speakers to be connected to the ZONE 2A/B jacks must have an impedance of 8 to 16 Ω. 0 You cannot use ZONE SPEAKER if you have connected the front speakers using Bi-Amping connection. 0 Please note that it is not possible to connect to the ZONE 2B jacks when surround back speakers or height speakers are connected. 0 No sound is played from the surround back speakers or the height speakers when playing audio from ZONE SPEAKER. Connections with an AV component When outputting the audio of an externally connected AV component to ZONE 2, you need to connect using a digital coaxial cable, digital optical cable, or analog audio cable. Setup 0 Settings are required in Initial Setup, "4. Multi Zone Setup" (P24) to enjoy this feature. 0 To use the ZONE 2A+B output, set "Zone Speaker" in "1. AccuEQ Room Calibration" (P23) in Initial Setup to "Zone 2A + B". 0 The audio from externally connected AV components can only be played in ZONE 2 when the audio is analog or 2ch PCM audio. If you have connected to this unit with a digital coaxial cable or digital optical cable, it may be necessary to change the audio output of the AV component to PCM output. En 21