Onkyo TX-NR777 Owners Manual -Basic - Page 30
Multi-zone
View all Onkyo TX-NR777 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
> Before Start > Part Names > Install > Initial Setup > Playback Multi-zone 1 2 3 To return the remote controller to main room control mode: While holding down MODE on the remote controller, press MAIN (c) for 3 seconds or more until the remote indicator flashes once. a b Basic Operations unit is on. main amplifier for the separate room You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). 0 DSD and Dolby TrueHD audio signals are not output to ZONE 2 when selected with the "NET" input selector. 0 You can only select the same inputs for 1. While holding down MODE (e) on the remote controller, press ZONE 2 (d) for 3 or more seconds until the remote indicator blinks twice. 0 The remote controller switches to the mode for controlling ZONE 2. 2. Point the remote controller at the main unit and press Í (a). "Z2" lights on the main unit display. when connected via ZONE 2 LINE OUT. When outputting from ZONE speakers, adjust with volume buttons on the remote controller. 0 To control on the main unit, press ZONE 2 and adjust with the MASTER VOLUME control within 8 seconds. To turn off the function: Press Í while in the mode for controlling the main room and separate room with ZONE 2 on the remote controller. the "NET" or "BLUETOOTH" input selector. If you have "NET" selected in Alternatively press OFF on the main unit. c the main room and then select "BLUETOOTH" in the separate room, the main room also switches to "BLUETOOTH". You cannot select different stations for the main room and separate room with the AM/FM radio. 0 If ZONE 2 is on, power consumption during standby becomes larger than 3. Press the input selector button (b) of the input to be played in the separate room. 0 On the main unit, after pressing ZONE 2, within 8 seconds press the input selector button to select the input to be played in the separate room. To play the same source in the main room and separate room, press Playing in ZONE 2 only: If you turn the unit to standby during multizone playback, the Z2 indicator is dimmed and the playback mode is switched to playback in a separate room only. Setting ZONE 2 to on while this unit is in standby will also switch the playback mode to the same setting. d e normal. ZONE 2 on the main unit twice. Perform the following procedure when the 4. Volume adjustment is done on the pre- 30