Onkyo TX-RZ3100 AV Receiver Basic/Advanced Manual English - Page 39

>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix General Specifications ˙ Amplifier Section Rated Output Power (FTC) (North American) With 8 ohm loads, both channels driven, at 1 kHz; rated 140 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. Surround Mode Output Power (＊) (6 ohms, 1 kHz THD 0.9%) 200 W per channel ＊ Reference output for each speakers. Depending on the source and the listening mode settings, there may be no sound output. Rated Output Power (IEC) (Others) 11 ch × 200 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD Maximum Effective Output Power (JEITA) (Asian and Australian) 11 ch × 320 W at 4 ohms, 1 kHz, 1 ch driven of 10% THD Dynamic Power (＊) ＊ IEC60268-Short-term maximum output power 320 W (3 Ω, Front) 270 W (4 Ω, Front) 160 W (8 Ω, Front) THD+N (Total Harmonic Distortion+Noise) 0.04% (1 kHz, 100 W) Input Sensitivity and Impedance (1 kHz, 100 W/8 Ω) 200 mV/82 kΩ (LINE (Unbalance)) 3.5 mV/47 kΩ (PHONO MM) Rated RCA Output Level and Impedance 1 V/330 Ω (PRE OUT) 1 V/330 Ω (SUBWOOFER PRE OUT) 200 mV/1.2 kΩ (ZONE LINE OUT) 2 V/1.2 kΩ (ZONE PRE OUT) Phono Overload 70 mV (MM 1 kHz 0.5%) Tone Control Characteristics ±10 dB, 100 Hz (BASS) ±10 dB, 10 kHz (TREBLE) Signal to Noise Ratio 108 dB (IHF-A, LINE IN, SP OUT) 90 dB (IHF-A, PHONO IN, SP OUT) Speaker Impedance 4 Ω - 16 Ω Headphone Output Impedance 43 Ω Headphone Rated Output 57 mW (32 Ω, 1 kHz, 10% THD) ˙ Video Section Signal level 1 Vp-p/75 Ω (Composite Video) 1 Vp-p/75 Ω (Component Video Y) 0.7 Vp-p/75 Ω (Component Video PB/PR) Maximum resolution supported by component video 1080i (＊) ＊＊When output from HDMI, only 480i/576i resolution input is possible. ˙ Tuner Section FM Tuning Frequency Range 87.5 MHz - 107.9 MHz (North American) 87.5 MHz - 108.0 MHz, RDS (Others) AM Tuning Frequency Range 530 kHz - 1710 kHz (North American) 522/530 kHz - 1611/1710 kHz (Others) Preset Channel 40 ˙ Network Section Ethernet LAN 10BASE-T/100BASE-TX Wireless LAN IEEE 802.11 a/b/g/n standard (Wi-FiR standard) 5 GHz/2.4 GHz band ˙ BLUETOOTH Section Communication system BLUETOOTH Specification version 4.1+LE Frequency band 2.4 GHz band Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles A2DP 1.2 AVRCP 1.3 HOGP-Host (Client) HOGP-HID Device (Server) HID Service (HIDS) Supported Codecs SBC AAC Transmission range (A2DP) 20 Hz - 20 kHz (Sampling frequency 44.1 kHz) Maximum communication range Line of sight approx. 15 m (＊) ＊＊The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. ˙ General Power Supply AC 120 V, 60 Hz (North American) AC 220 - 230 V, 50/60 Hz (European, Australian and Chinese) AC 220 - 230/240 V, 50/60 Hz (Others) Power Consumption 340 W 0.15 W (Stand-by, North American) 0.2 W (Stand-by, Others) 100 W (No-sound) 6 W (HDMI Standby Through) 2.5 W (Network Standby) Dimensions (W × H × D) 435 mm × 201 mm × 453 mm 3