Onkyo TX-RZ820 Owners Manual - English - Page 32

> Before Start > Part Names > Install > Initial Setup > Playback 0 The information for a connected device can be displayed on the TV screen in a separate room. Press the button while the remote controller is in the mode for controlling ZONE 2. To turn off the function: Press Í while in the mode for controlling ZONE 2 or ZONE 3 on the remote controller. Playing in ZONE 2 or ZONE 3 only: If you turn the unit to standby during multizone playback, the Z2 or Z3 indicator is dimmed and the playback mode is switched to playback in a separate room only. Setting ZONE 2/ZONE 3 to on while this unit is in standby will also switch the playback mode to the same setting. WHOLE HOUSE MODE If you press WHOLE HOUSE MODE while playback is being performed in the main room, the WHOLE HOUSE MODE is turned on, "Z2" and "Z3" on the display light at the same time and the playback sources of all the rooms are switched to the same source at once. 0 The sources that can be played in ZONE 2 can be played in all rooms. 0 This function cannot be used if headphones are connected or audio is output from the speakers of the TV. To return the remote controller to main room control mode: While holding down MODE on the remote controller, press MAIN (c) for 3 seconds or more until the remote indicator flashes once. 32