Onkyo TX-SR707 Owner Manual - Page 104
Setting the Powered Zone 2, Notes, Not Act
View all Onkyo TX-SR707 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Zone 2-Continued Setting the Powered Zone 2 If you've connected your Zone 2 speakers to the AV receiver, as explained in "Connecting Your Zone 2 Speakers Directly to the AV receiver" on page 103, you must set the "Powered Zone2" setting to "Act" (Activated). 1 Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use the Up and Down [R]/[X] buttons to select "2. Speaker Setup", and then press [ENTER]. The "Speaker Setup" menu appears. 2. Speaker Setup 1. Speaker Settings 2. Speaker Configuration 3. Speaker Distance 4. Level Calibration 5. Equalizer Settings 6. THX Audio Setup 4 Use the Up and Down [R]/[X] buttons to select "Powered Zone2", and use the Left and Right [F]/[S] buttons to select: Not Act: ZONE 2 L/R speaker terminals not activated (Powered Zone 2 disabled). Act: ZONE 2 L/R speaker terminals activated (Powered Zone 2 enabled). 5 Press the [SETUP] button. The setup menu closes. Notes: • Powered Zone2 cannot be used if "Speakers Type(Front)" is set to "Bi-Amp" (see page 47). • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 3 Use the Up and Down [R]/[X] buttons to select "1. Speaker Settings", and then press [ENTER]. The "Speaker Settings" menu appears. 104