Onkyo TX-SR707 Owner Manual - Page 43
Monitor Out Setup, Use the Left and Right
View all Onkyo TX-SR707 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
First Time Setup-Continued Monitor Out Setup 4 RECEIVER ENTER SETUP RXFS You can specify the output resolution for the HDMI OUT and COMPONENT VIDEO MONITOR OUT and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV. 1 Press the [RECEIVER] button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 5 Use the Left and Right [F]/[S] buttons to select: Through: Select this to pass video through the AV receiver at the same resolution and with no conversion. Auto: Select this to have the AV receiver automatically convert video at resolutions not supported by your TV. 480p (480p/576p): Select this for 480p or 576p output and video conversion as necessary. 720p: Select this for 720p output and video conversion as necessary. 1080i: Select this for 1080i output and video conversion as necessary. 1080p: Select this for 1080p output and video conversion as necessary. Tip: The "Resolution" setting can also be set using the [VIDEO] button on the remote controller. Press the [SETUP] button. The setup menu closes. 2 Use the Up and Down [R]/[X] but- tons to select "1. Input/Output Assign", and then press [ENTER]. Note: This procedure can also be performed on the AV receiver The "Input/Output Assign" menu by using its [SETUP] button, arrow buttons, and appears. [ENTER] button. 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input 4. Digital Audio Input 3 Use the Up and Down [R]/[X] but- tons to select "1. Monitor Out", and then press [ENTER]. The "Monitor Out" menu appears. 1-1. Monitor Out Resolution Through 43