Optoma H30 User Manual - Page 13

Adjusting the Projected Image

Page 13 highlights

English Installation Adjusting the Projected Image Adjusting the Projector's Height The projector is equipped with an elevator foot to adjust the projector's height. To raise or lower the projector : 1. Turn the projector over and locate the elevator foot. Press the elevator button to extend the foot so it may be adjusted. 2. While holding down the elevator button, adjust the foot to the desired height, then release the button to lock the elevator foot into position. 3. Use to fine-tune tilt-adjustment 4. Lower the projector so it rests on its foot; adjust as needed. 1 3 Tilt-adjustment Foot 2 Elevator Foot 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

13
E
nglish
Elevator Foot
Installation
The projector is equipped with an elevator foot to adjust the
projector’s height.
To raise or lower the projector :
1.
Turn the projector over and locate the elevator foot. Press
the elevator button
²
to extend the foot so it may be
adjusted.
2.
While holding down the elevator button, adjust the foot to
the desired height,
³
then release the button to lock the
elevator foot into position.
3. Use
´
to fine-tune tilt-adjustment
4.
Lower the projector so it rests on its foot; adjust as
needed.
Adjusting the Projected Image
Adjusting the Projector’s
Height
1
3
2
Tilt-adjustment Foot