Optoma H30 User Manual - Page 29
Replacing the Lamp - replacement bulb
View all Optoma H30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
English Appendices Replacing the Lamp When the projector's lamp usage reachees 2,000 hours, it displays the following warning message "Lamp may fail soon ! Replacement Suggested !" When you see this message, please contact your local reseller or service center. Make sure the projector has cooled down for at least 30 minutes before replacing the lamp. Warning: Lamp compartment is hot! Allow it to cool down before replacing lamp! 2 3 1 Warning: To reduce the risk of personal injury, avoid dropping the lamp module or touching the lamp bulb. If dropped, the bulb may shatter and cause injury. Lamp Replacing Procedure: 1. Turn off the power to the lamp by pressing the power button. 2. Allow the projector to cool down at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to remove the screw at the bottom of projector as indicated. 5. Remove the cover. 6. Unscrew the three screws of the lamp module then remove the lamp module. To replace the lamp module, reverse the previous steps. 29