Optoma INTELLIGO-S1 IntelliGo S1 User Manual - Page 36
Select the input source manually, to WPA2 PSK or WPA PSK.
View all Optoma INTELLIGO-S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
USING THE PROJECTOR Level 1 Level 2 Personalize Software Update About Input Source Setup NO Signal Auto Shutdown Net update Local update Regulatory Model System Version Wireless MAC address Cable MAC address Memory Information (or/total) Software Version Hardware Version Level 3 Level 4 Level 5 Value Auto HDMI AV On Off LDMLSSZ 4.4.4 by Model by Model by Model by Model by Model Note: *1Options are available only if "Security" in "WIFI" > "Wi-Fi hotspot" > "Config wifi hotspot" menu is set to "WPA2 PSK" or "WPA PSK". *2Options are available only if "Through the network to be automatic gain time date" parameter in "System" > "Date time setting" menu is "Off". Select the input source manually You can configure the projector to detect the input source automatically (please refer to page 28) or set the input source manually. To set the input source manually, do the following: 1. Tap the , , , or key to select either the "HDMI" tab or the "AV" tab. 2. After selecting the tab, tap the key to set the input source. Note: If the input source cannot be found, you are prompted to return to Android menu (Home screen). Select the "OK" option and tap the key to confirm. 36 English