Optoma ML1050ST ML1050ST User Manual - Page 20
Turning On/Off the Projector, Turning Your Projector
View all Optoma ML1050ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Turning On/Off the Projector Turning Your Projector On Note: Turn on the projector before you turn on the source (computer, DVD player, etc.). The Power button light blinks amber until pressed. 1. Connect the power cord with AC adapter and appropriate signal cables to the projector. 2. Remove the lens cap. 3. Press the Power button. 4. Turn on your source (computer, DVD player, etc). 5. Connect your source to the projector using the appropriate cable. 6. The input source is determined by the last connected input source. (By default, the input source of the projector is set to Multimedia). Change the input source of the projector if necessary. Turning Your Projector Off Note: The "Press Power Button to Turn Off Projector" message will appear on the screen. The message disappears after 5 seconds or you can press the Menu button to clear it. 1. Press the Power button. Follow the instruction displayed on screen to properly turn off the projector. 2. Press the Power button again. The cooling fans continue to operate for 3~5 seconds. 3. Disconnect the power cord and AC adapter from the electrical outlet and the projector. 20 English